TEXT 73
Ssd.txt Guest on 9th April 2021 12:46:54 PM
  1. [ 6355.145150] usb 1-1.3.4: new high-speed USB device number 10 using ci_hdrc
  2. [ 6355.259148] usb 1-1.3.4: New USB device found, idVendor=04fc, idProduct=0c25
  3. [ 6355.259182] usb 1-1.3.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  4. [ 6355.259204] usb 1-1.3.4: Product: USB to Serial-ATA bridge
  5. [ 6355.259225] usb 1-1.3.4: Manufacturer: Sunplus Technology Inc.
  6. [ 6355.259246] usb 1-1.3.4: SerialNumber: Samsung SSS1DFNEAD802015A    
  7. [ 6355.262693] usb-storage 1-1.3.4:1.0: USB Mass Storage device detected
  8. [ 6355.263961] scsi host2: usb-storage 1-1.3.4:1.0
  9. [ 6356.270322] scsi 2:0:0:0: Direct-Access     Samsung  SSD 840 EVO 250G B    PQ: 0 ANSI: 2
  10. [ 6356.273359] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  11. [ 6356.276485] sd 2:0:0:0: [sda] Write Protect is off
  12. [ 6356.276523] sd 2:0:0:0: [sda] Mode Sense: 38 00 00 00
  13. [ 6356.279138] sd 2:0:0:0: [sda] No Caching mode page found
  14. [ 6356.279173] sd 2:0:0:0: [sda] Assuming drive cache: write through
  15. [ 6356.291041]  sda: sda1
  16. [ 6356.298031] sd 2:0:0:0: [sda] Attached SCSI disk
  17.  
  18.  
  19. /dev/sda:
  20.  
  21. ATA device, with non-removable media
  22.       Model Number:       Samsung SSD 840 EVO 250GB              
  23.       Serial Number:      S1DFNEAD802015A    
  24.       Firmware Revision:  EXT0CB6Q
  25.       Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  26. Standards:
  27.       Used: unknown (minor revision code 0x0039)
  28.       Supported: 9 8 7 6 5
  29.       Likely used: 9
  30. Configuration:
  31.       Logical           max   current
  32.       cylinders   16383 16383
  33.       heads       16    16
  34.       sectors/track     63    63
  35.       --
  36.       CHS current addressable sectors:   16514064
  37.       LBA    user addressable sectors:  268435455
  38.       LBA48  user addressable sectors:  488397168
  39.       Logical  Sector size:                   512 bytes
  40.       Physical Sector size:                   512 bytes
  41.       Logical Sector-0 offset:                  0 bytes
  42.       device size with M = 1024*1024:      238475 MBytes
  43.       device size with M = 1000*1000:      250059 MBytes (250 GB)
  44.       cache/buffer size  = unknown
  45.       Nominal Media Rotation Rate: Solid State Device
  46. Capabilities:
  47.       LBA, IORDY(can be disabled)
  48.       Queue depth: 32
  49.       Standby timer values: spec'd by Standard, no device specific minimum
  50.       R/W multiple sector transfer: Max = 1     Current = 1
  51.       DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  52.            Cycle time: min=120ns recommended=120ns
  53.       PIO: pio0 pio1 pio2 pio3 pio4
  54.            Cycle time: no flow control=120ns  IORDY flow control=120ns
  55. Commands/features:
  56.       Enabled     Supported:
  57.          *  SMART feature set
  58.             Security Mode feature set
  59.          *  Power Management feature set
  60.          *  Write cache
  61.          *  Look-ahead
  62.          *  Host Protected Area feature set
  63.          *  WRITE_BUFFER command
  64.          *  READ_BUFFER command
  65.          *  NOP cmd
  66.          *  DOWNLOAD_MICROCODE
  67.             SET_MAX security extension
  68.          *  48-bit Address feature set
  69.          *  Device Configuration Overlay feature set
  70.          *  Mandatory FLUSH_CACHE
  71.          *  FLUSH_CACHE_EXT
  72.          *  SMART error logging
  73.          *  SMART self-test
  74.          *  General Purpose Logging feature set
  75.          *  WRITE_{DMA|MULTIPLE}_FUA_EXT
  76.          *  64-bit World wide name
  77.             Write-Read-Verify feature set
  78.          *  WRITE_UNCORRECTABLE_EXT command
  79.          *  {READ,WRITE}_DMA_EXT_GPL commands
  80.          *  Segmented DOWNLOAD_MICROCODE
  81.          *  Gen1 signaling speed (1.5Gb/s)
  82.          *  Gen2 signaling speed (3.0Gb/s)
  83.          *  Gen3 signaling speed (6.0Gb/s)
  84.          *  Native Command Queueing (NCQ)
  85.          *  Phy event counters
  86.          *  unknown 76[15]
  87.             DMA Setup Auto-Activate optimization
  88.             Device-initiated interface power management
  89.          *  Asynchronous notification (eg. media change)
  90.          *  Software settings preservation
  91.          *  SMART Command Transport (SCT) feature set
  92.          *  SCT Write Same (AC2)
  93.          *  SCT Error Recovery Control (AC3)
  94.          *  SCT Features Control (AC4)
  95.          *  SCT Data Tables (AC5)
  96.          *  reserved 69[4]
  97.          *  DOWNLOAD MICROCODE DMA command
  98.          *  SET MAX SETPASSWORD/UNLOCK DMA commands
  99.          *  WRITE BUFFER DMA command
  100.          *  READ BUFFER DMA command
  101.          *  Data Set Management TRIM supported (limit 8 blocks)
  102. Security:
  103.       Master password revision code = 65534
  104.             supported
  105.       not   enabled
  106.       not   locked
  107.       not   frozen
  108.       not   expired: security count
  109.             supported: enhanced erase
  110.       2min for SECURITY ERASE UNIT. 8min for ENHANCED SECURITY ERASE UNIT.
  111. Logical Unit WWN Device Identifier: 500253885002f766
  112.       NAA         : 5
  113.       IEEE OUI    : 002538
  114.       Unique ID   : 85002f766
  115. Checksum: correct
  116.  
  117. /dev/sda:
  118.  
  119. ATA device, with non-removable media
  120.       Model Number:       Samsung SSD 840 EVO 250GB              
  121.       Serial Number:      S1DFNEAD802015A    
  122.       Firmware Revision:  EXT0CB6Q
  123.       Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  124. Standards:
  125.       Used: unknown (minor revision code 0x0039)
  126.       Supported: 9 8 7 6 5
  127.       Likely used: 9
  128. Configuration:
  129.       Logical           max   current
  130.       cylinders   16383 16383
  131.       heads       16    16
  132.       sectors/track     63    63
  133.       --
  134.       CHS current addressable sectors:   16514064
  135.       LBA    user addressable sectors:  268435455
  136.       LBA48  user addressable sectors:  488397168
  137.       Logical  Sector size:                   512 bytes
  138.       Physical Sector size:                   512 bytes
  139.       Logical Sector-0 offset:                  0 bytes
  140.       device size with M = 1024*1024:      238475 MBytes
  141.       device size with M = 1000*1000:      250059 MBytes (250 GB)
  142.       cache/buffer size  = unknown
  143.       Nominal Media Rotation Rate: Solid State Device
  144. Capabilities:
  145.       LBA, IORDY(can be disabled)
  146.       Queue depth: 32
  147.       Standby timer values: spec'd by Standard, no device specific minimum
  148.       R/W multiple sector transfer: Max = 1     Current = 1
  149.       DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  150.            Cycle time: min=120ns recommended=120ns
  151.       PIO: pio0 pio1 pio2 pio3 pio4
  152.            Cycle time: no flow control=120ns  IORDY flow control=120ns
  153. Commands/features:
  154.       Enabled     Supported:
  155.          *  SMART feature set
  156.             Security Mode feature set
  157.          *  Power Management feature set
  158.          *  Write cache
  159.          *  Look-ahead
  160.          *  Host Protected Area feature set
  161.          *  WRITE_BUFFER command
  162.          *  READ_BUFFER command
  163.          *  NOP cmd
  164.          *  DOWNLOAD_MICROCODE
  165.             SET_MAX security extension
  166.          *  48-bit Address feature set
  167.          *  Device Configuration Overlay feature set
  168.          *  Mandatory FLUSH_CACHE
  169.          *  FLUSH_CACHE_EXT
  170.          *  SMART error logging
  171.          *  SMART self-test
  172.          *  General Purpose Logging feature set
  173.          *  WRITE_{DMA|MULTIPLE}_FUA_EXT
  174.          *  64-bit World wide name
  175.             Write-Read-Verify feature set
  176.          *  WRITE_UNCORRECTABLE_EXT command
  177.          *  {READ,WRITE}_DMA_EXT_GPL commands
  178.          *  Segmented DOWNLOAD_MICROCODE
  179.          *  Gen1 signaling speed (1.5Gb/s)
  180.          *  Gen2 signaling speed (3.0Gb/s)
  181.          *  Gen3 signaling speed (6.0Gb/s)
  182.          *  Native Command Queueing (NCQ)
  183.          *  Phy event counters
  184.          *  unknown 76[15]
  185.             DMA Setup Auto-Activate optimization
  186.             Device-initiated interface power management
  187.          *  Asynchronous notification (eg. media change)
  188.          *  Software settings preservation
  189.          *  SMART Command Transport (SCT) feature set
  190.          *  SCT Write Same (AC2)
  191.          *  SCT Error Recovery Control (AC3)
  192.          *  SCT Features Control (AC4)
  193.          *  SCT Data Tables (AC5)
  194.          *  reserved 69[4]
  195.          *  DOWNLOAD MICROCODE DMA command
  196.          *  SET MAX SETPASSWORD/UNLOCK DMA commands
  197.          *  WRITE BUFFER DMA command
  198.          *  READ BUFFER DMA command
  199.          *  Data Set Management TRIM supported (limit 8 blocks)
  200. Security:
  201.       Master password revision code = 65534
  202.             supported
  203.       not   enabled
  204.       not   locked
  205.       not   frozen
  206.       not   expired: security count
  207.             supported: enhanced erase
  208.       2min for SECURITY ERASE UNIT. 8min for ENHANCED SECURITY ERASE UNIT.
  209. Logical Unit WWN Device Identifier: 500253885002f766
  210.       NAA         : 5
  211.       IEEE OUI    : 002538
  212.       Unique ID   : 85002f766
  213. Checksum: correct
  214.  
  215. /dev/sda:
  216.  
  217. ATA device, with non-removable media
  218.       Model Number:       Samsung SSD 840 EVO 250GB              
  219.       Serial Number:      S1DFNEAD802015A    
  220.       Firmware Revision:  EXT0CB6Q
  221.       Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  222. Standards:
  223.       Used: unknown (minor revision code 0x0039)
  224.       Supported: 9 8 7 6 5
  225.       Likely used: 9
  226. Configuration:
  227.       Logical           max   current
  228.       cylinders   16383 16383
  229.       heads       16    16
  230.       sectors/track     63    63
  231.       --
  232.       CHS current addressable sectors:   16514064
  233.       LBA    user addressable sectors:  268435455
  234.       LBA48  user addressable sectors:  488397168
  235.       Logical  Sector size:                   512 bytes
  236.       Physical Sector size:                   512 bytes
  237.       Logical Sector-0 offset:                  0 bytes
  238.       device size with M = 1024*1024:      238475 MBytes
  239.       device size with M = 1000*1000:      250059 MBytes (250 GB)
  240.       cache/buffer size  = unknown
  241.       Nominal Media Rotation Rate: Solid State Device
  242. Capabilities:
  243.       LBA, IORDY(can be disabled)
  244.       Queue depth: 32
  245.       Standby timer values: spec'd by Standard, no device specific minimum
  246.       R/W multiple sector transfer: Max = 1     Current = 1
  247.       DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  248.            Cycle time: min=120ns recommended=120ns
  249.       PIO: pio0 pio1 pio2 pio3 pio4
  250.            Cycle time: no flow control=120ns  IORDY flow control=120ns
  251. Commands/features:
  252.       Enabled     Supported:
  253.          *  SMART feature set
  254.             Security Mode feature set
  255.          *  Power Management feature set
  256.          *  Write cache
  257.          *  Look-ahead
  258.          *  Host Protected Area feature set
  259.          *  WRITE_BUFFER command
  260.          *  READ_BUFFER command
  261.          *  NOP cmd
  262.          *  DOWNLOAD_MICROCODE
  263.             SET_MAX security extension
  264.          *  48-bit Address feature set
  265.          *  Device Configuration Overlay feature set
  266.          *  Mandatory FLUSH_CACHE
  267.          *  FLUSH_CACHE_EXT
  268.          *  SMART error logging
  269.          *  SMART self-test
  270.          *  General Purpose Logging feature set
  271.          *  WRITE_{DMA|MULTIPLE}_FUA_EXT
  272.          *  64-bit World wide name
  273.             Write-Read-Verify feature set
  274.          *  WRITE_UNCORRECTABLE_EXT command
  275.          *  {READ,WRITE}_DMA_EXT_GPL commands
  276.          *  Segmented DOWNLOAD_MICROCODE
  277.          *  Gen1 signaling speed (1.5Gb/s)
  278.          *  Gen2 signaling speed (3.0Gb/s)
  279.          *  Gen3 signaling speed (6.0Gb/s)
  280.          *  Native Command Queueing (NCQ)
  281.          *  Phy event counters
  282.          *  unknown 76[15]
  283.             DMA Setup Auto-Activate optimization
  284.             Device-initiated interface power management
  285.          *  Asynchronous notification (eg. media change)
  286.          *  Software settings preservation
  287.          *  SMART Command Transport (SCT) feature set
  288.          *  SCT Write Same (AC2)
  289.          *  SCT Error Recovery Control (AC3)
  290.          *  SCT Features Control (AC4)
  291.          *  SCT Data Tables (AC5)
  292.          *  reserved 69[4]
  293.          *  DOWNLOAD MICROCODE DMA command
  294.          *  SET MAX SETPASSWORD/UNLOCK DMA commands
  295.          *  WRITE BUFFER DMA command
  296.          *  READ BUFFER DMA command
  297.          *  Data Set Management TRIM supported (limit 8 blocks)
  298. Security:
  299.       Master password revision code = 65534
  300.             supported
  301.       not   enabled
  302.       not   locked
  303.       not   frozen
  304.       not   expired: security count
  305.             supported: enhanced erase
  306.       2min for SECURITY ERASE UNIT. 8min for ENHANCED SECURITY ERASE UNIT.
  307. Logical Unit WWN Device Identifier: 500253885002f766
  308.       NAA         : 5
  309.       IEEE OUI    : 002538
  310.       Unique ID   : 85002f766
  311. Checksum: correct
  312. outgoing cdb:  85 08 0e 00 00 00 01 00 00 00 00 00 00 40 ec 00
  313. SG_IO: ATA_16 status=0x0, host_status=0x0, driver_status=0x0
  314. SG_IO: sb[]:  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  315. incoming_data:  40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 00 00 00 00 31 53 46 44 45 4e 44 41 30 38 30 32 35 31 20 41 20 20 20 20 00 00 00 00 00 00 58 45 30 54 42 43 51 36 61 53 73 6d 6e 75 20 67 53 53 20 44 34 38 20 30 56 45 20 4f 35 32 47 30 20 42 20 20 20 20 20 20 20 20 20 20 20 20 20 20 01 80 01 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 3f 00 10 fc fb 00 01 01 ff ff ff 0f 00 00 07 00 03 00 78 00 78 00 78 00 78 00 10 0f 00 00 00 00 00 00 00 00 00 00 1f 00 0e 85 44 00 6c 00 60 00 fc 03 39 00 6b 74 01 7d 63 41 69 74 01 bc 63 41 7f 40 01 00 04 00 00 00 fe ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 59 1c 1d 00 00 00 00 00 00 08 00 00 40 00 00 02 50 88 53 02 50 66 f7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 7f 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 25
  316. SG_IO: desc[]:  00 00
  317.       ATA_16 stat=00 err=00 nsect=00 lbal=00 lbam=00 lbah=00 dev=00
  318. [    0.000000] Booting Linux on physical CPU 0x0
  319. [    0.000000] Initializing cgroup subsys cpuset
  320. [    0.000000] Initializing cgroup subsys cpu
  321. [    0.000000] Initializing cgroup subsys cpuacct
  322. [    0.000000] Linux version 3.17.0-rc5-00217-gfd79638 (xobs@xobs-novena) (gcc version 4.9.1 (Debian 4.9.1-19) ) #276 SMP PREEMPT Fri Nov 14 20:15:41 SGT 2014
  323. [    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  324. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  325. [    0.000000] Machine model: Kosagi Novena Dual/Quad
  326. [    0.000000] Ignoring memory range 0xffffffff - 0x100000000
  327. [    0.000000] cma: Reserved 256 MiB at 2f800000
  328. [    0.000000] Memory policy: Data cache writealloc
  329. [    0.000000] On node 0 totalpages: 983039
  330. [    0.000000] free_area_init_node: node 0, pgdat c0ad4a00, node_mem_map dd978000
  331. [    0.000000]   Normal zone: 1520 pages used for memmap
  332. [    0.000000]   Normal zone: 0 pages reserved
  333. [    0.000000]   Normal zone: 194560 pages, LIFO batch:31
  334. [    0.000000]   HighMem zone: 6160 pages used for memmap
  335. [    0.000000]   HighMem zone: 788479 pages, LIFO batch:31
  336. [    0.000000] PERCPU: Embedded 9 pages/cpu @dd926000 s12736 r8192 d15936 u36864
  337. [    0.000000] pcpu-alloc: s12736 r8192 d15936 u36864 alloc=9*4096
  338. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  339. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 981519
  340. [    0.000000] Kernel command line: init=/lib/systemd/systemd rootwait rw root=PARTUUID=4e6f764d-03 console=tty0
  341. [    0.000000] log_buf_len individual max cpu contribution: 65536 bytes
  342. [    0.000000] log_buf_len total cpu_extra contributions: 196608 bytes
  343. [    0.000000] log_buf_len min size: 131072 bytes
  344. [    0.000000] log_buf_len: 524288 bytes
  345. [    0.000000] early log buf free: 129292(98%)
  346. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  347. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  348. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  349. [    0.000000] allocated 7864312 bytes of page_cgroup
  350. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  351. [    0.000000] Memory: 3617948K/3932156K available (7919K kernel code, 364K rwdata, 2296K rodata, 524K init, 338K bss, 314208K reserved, 3153916K highmem)
  352. [    0.000000] Virtual kernel memory layout:
  353.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  354.     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
  355.     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  356.     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  357.     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  358.     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  359.       .text : 0xc0008000 - 0xc0a01f84   (10216 kB)
  360.       .init : 0xc0a02000 - 0xc0a851c0   ( 525 kB)
  361.       .data : 0xc0a86000 - 0xc0ae11ec   ( 365 kB)
  362.        .bss : 0xc0ae11ec - 0xc0b35b64   ( 339 kB)
  363. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  364. [    0.000000] Preemptible hierarchical RCU implementation.
  365. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  366. [    0.000000] L2C-310 erratum 769419 enabled
  367. [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
  368. [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  369. [    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
  370. [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  371. [    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  372. [    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001
  373. [    0.000000] Switching to timer-based delay loop, resolution 15ns
  374. [    0.000007] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 65075262448ns
  375. [    0.001546] Console: colour dummy device 80x30
  376. [    0.002709] console [tty0] enabled
  377. [    0.002741] Calibrating delay loop (skipped), value calculated using timer frequency.. 132.00 BogoMIPS (lpj=660000)
  378. [    0.002795] pid_max: default: 32768 minimum: 301
  379. [    0.002952] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  380. [    0.002991] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  381. [    0.003688] Initializing cgroup subsys memory
  382. [    0.003738] Initializing cgroup subsys devices
  383. [    0.003772] Initializing cgroup subsys freezer
  384. [    0.003806] Initializing cgroup subsys blkio
  385. [    0.003837] Initializing cgroup subsys perf_event
  386. [    0.003906] CPU: Testing write buffer coherency: ok
  387. [    0.003960] ftrace: allocating 25917 entries in 77 pages
  388. [    0.048010] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  389. [    0.048146] Setting up static identity map for 0x1072b520 - 0x1072b578
  390. [    0.120467] CPU1: Booted secondary processor
  391. [    0.120501] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  392. [    0.140452] CPU2: Booted secondary processor
  393. [    0.140475] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  394. [    0.160462] CPU3: Booted secondary processor
  395. [    0.160487] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  396. [    0.160575] Brought up 4 CPUs
  397. [    0.160680] SMP: Total of 4 processors activated.
  398. [    0.160697] CPU: All CPU(s) started in SVC mode.
  399. [    0.161413] devtmpfs: initialized
  400. [    0.165153] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  401. [    0.179213] pinctrl core: initialized pinctrl subsystem
  402. [    0.179720] regulator-dummy: no parameters
  403. [    0.189497] NET: Registered protocol family 16
  404. [    0.192022] DMA: preallocated 256 KiB pool for atomic coherent allocations
  405. [    0.193114] cpuidle: using governor ladder
  406. [    0.193142] cpuidle: using governor menu
  407. [    0.193314] CPU identified as i.MX6Q, silicon rev 1.2
  408. [    0.201517] vdd1p1: 800 <--> 1375 mV at 1100 mV
  409. [    0.201965] vdd3p0: 2800 <--> 3150 mV at 3000 mV
  410. [    0.202411] vdd2p5: 2000 <--> 2750 mV at 2400 mV
  411. [    0.202850] vddarm: 725 <--> 1450 mV at 1150 mV
  412. [    0.203301] vddpu: 725 <--> 1450 mV at 1150 mV
  413. [    0.203742] vddsoc: 725 <--> 1450 mV at 1175 mV
  414. [    0.213514] No ATAGs?
  415. [    0.213565] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  416. [    0.213601] hw-breakpoint: maximum watchpoint size is 4 bytes.
  417. [    0.214177] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  418. [    0.251680] 2P5V: 2500 mV
  419. [    0.251766] reg-fixed-voltage regulators:2p5v: 2P5V supplying 2500000uV
  420. [    0.251950] 3P3V: 3300 mV
  421. [    0.252036] reg-fixed-voltage regulators:3p3v: 3P3V supplying 3300000uV
  422. [    0.252233] usb_otg_vbus: 5000 mV
  423. [    0.252310] reg-fixed-voltage regulators:usb_otg_vbus: usb_otg_vbus supplying 5000000uV
  424. [    0.660503] es8328-power: 5000 mV
  425. [    0.660603] reg-fixed-voltage regulators:es8328-regulator: es8328-power supplying 5000000uV
  426. [    0.660806] lcd-lvds-power: 3300 mV
  427. [    0.660882] reg-fixed-voltage regulators:lcd-regulator: lcd-lvds-power supplying 3300000uV
  428. [    0.661081] lcd-display-power: 3300 mV
  429. [    0.661191] reg-fixed-voltage regulators:display-regulator: lcd-display-power supplying 3300000uV
  430. [    0.680498] sata-power: 3300 mV
  431. [    0.680581] reg-fixed-voltage regulators:sata-regulator: sata-power supplying 3300000uV
  432. [    0.681073] vgaarb: loaded
  433. [    0.681456] SCSI subsystem initialized
  434. [    0.681538] libata version 3.00 loaded.
  435. [    0.681839] usbcore: registered new interface driver usbfs
  436. [    0.681933] usbcore: registered new interface driver hub
  437. [    0.682084] usbcore: registered new device driver usb
  438. [    0.683969] stmpe-i2c 0-0044: Looking up vcc-supply from device tree
  439. [    0.684060] stmpe-i2c 0-0044: Looking up vio-supply from device tree
  440. [    0.684902] stmpe-i2c 0-0044: stmpe811 detected, chip id: 0x811
  441. [    0.687569] i2c i2c-0: IMX I2C adapter registered
  442. [    0.688237] i2c i2c-1: IMX I2C adapter registered
  443. [    0.689534] i2c i2c-2: IMX I2C adapter registered
  444. [    0.689719] pps_core: LinuxPPS API ver. 1 registered
  445. [    0.689743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  446. [    0.689796] PTP clock support registered
  447. [    0.690204] Advanced Linux Sound Architecture Driver Initialized.
  448. [    0.691356] Bluetooth: Core ver 2.19
  449. [    0.691417] NET: Registered protocol family 31
  450. [    0.691436] Bluetooth: HCI device and connection manager initialized
  451. [    0.691467] Bluetooth: HCI socket layer initialized
  452. [    0.691491] Bluetooth: L2CAP socket layer initialized
  453. [    0.691538] Bluetooth: SCO socket layer initialized
  454. [    0.692124] cfg80211: Calling CRDA to update world regulatory domain
  455. [    0.692487] Switched to clocksource mxc_timer1
  456. [    0.723117] FS-Cache: Loaded
  457. [    0.723534] imx6q-pcie 1ffc000.pcie: missing *config* reg space
  458. [    0.846102] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
  459. [    0.846140] pci_bus 0000:00: root bus resource [io  0x1000-0x10000]
  460. [    0.846165] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
  461. [    0.846192] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  462. [    0.846249] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
  463. [    0.846279] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  464. [    0.846303] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  465. [    0.846368] pci 0000:00:00.0: supports D1
  466. [    0.846380] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
  467. [    0.846697] PCI: bus0: Fast back to back transfers disabled
  468. [    0.846957] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
  469. [    0.847074] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff 64bit]
  470. [    0.847249] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  471. [    0.847486] pci 0000:01:00.0: supports D1
  472. [    0.847499] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
  473. [    0.862596] PCI: bus1: Fast back to back transfers disabled
  474. [    0.862627] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  475. [    0.862645] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
  476. [    0.862765] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
  477. [    0.862802] pci 0000:00:00.0: BAR 14: assigned [mem 0x01100000-0x011fffff]
  478. [    0.862831] pci 0000:00:00.0: BAR 15: assigned [mem 0x01200000-0x012fffff pref]
  479. [    0.862861] pci 0000:00:00.0: BAR 6: assigned [mem 0x01300000-0x0130ffff pref]
  480. [    0.862896] pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x0117ffff 64bit]
  481. [    0.862974] pci 0000:01:00.0: BAR 6: assigned [mem 0x01200000-0x0120ffff pref]
  482. [    0.863005] pci 0000:00:00.0: PCI bridge to [bus 01]
  483. [    0.863029] pci 0000:00:00.0:   bridge window [mem 0x01100000-0x011fffff]
  484. [    0.863056] pci 0000:00:00.0:   bridge window [mem 0x01200000-0x012fffff pref]
  485. [    0.863106] pci 0000:00:00.0: PCI bridge to [bus 01]
  486. [    0.863131] pci 0000:00:00.0:   bridge window [mem 0x01100000-0x011fffff]
  487. [    0.863158] pci 0000:00:00.0:   bridge window [mem 0x01200000-0x012fffff pref]
  488. [    0.863191] pci_bus 0000:00: resource 4 [io  0x1000-0x10000]
  489. [    0.863203] pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff]
  490. [    0.863215] pci_bus 0000:01: resource 1 [mem 0x01100000-0x011fffff]
  491. [    0.863226] pci_bus 0000:01: resource 2 [mem 0x01200000-0x012fffff pref]
  492. [    0.876352] NET: Registered protocol family 2
  493. [    0.877123] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  494. [    0.877229] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  495. [    0.877368] TCP: Hash tables configured (established 8192 bind 8192)
  496. [    0.877463] TCP: reno registered
  497. [    0.877489] UDP hash table entries: 512 (order: 2, 16384 bytes)
  498. [    0.877557] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  499. [    0.877820] NET: Registered protocol family 1
  500. [    0.877922] PCI: CLS 64 bytes, default 64
  501. [    0.878509] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  502. [    0.881809] futex hash table entries: 1024 (order: 4, 65536 bytes)
  503. [    0.882020] audit: initializing netlink subsys (disabled)
  504. [    0.882087] audit: type=2000 audit(0.859:1): initialized
  505. [    0.891263] zpool: loaded
  506. [    0.891298] zbud: loaded
  507. [    0.893426] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  508. [    0.894866] fuse init (API version 7.23)
  509. [    0.896436] pstore: Registered eepromoops as persistent store backend
  510. [    0.896533] msgmni has been set to 1418
  511. [    0.898290] NET: Registered protocol family 38
  512. [    0.898411] bounce: pool size: 64 pages
  513. [    0.898660] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  514. [    0.898704] io scheduler noop registered (default)
  515. [    0.898732] io scheduler deadline registered
  516. [    0.898956] io scheduler cfq registered
  517. [    0.901106] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  518. [    0.901141] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  519. [    0.901172] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
  520. [    0.901631] pwm-backlight backlight: Looking up power-supply from device tree
  521. [    0.903013] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
  522. [    0.903057] imx-sdma 20ec000.sdma: firmware not found
  523. [    0.906294] imx-sdma 20ec000.sdma: initialized
  524. [    0.908154] pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 1
  525. [    0.908772] pfuze100-regulator 1-0008: FAB: 0, FIN: 0
  526. [    0.908797] pfuze100-regulator 1-0008: identify took 1 tries
  527. [    0.908820] pfuze100-regulator 1-0008: pfuze100 found.
  528. [    0.910369] SW1AB: 300 <--> 1875 mV at 1375 mV
  529. [    0.911194] SW1C: 300 <--> 1875 mV at 1375 mV
  530. [    0.912039] SW2: 800 <--> 3300 mV at 3000 mV
  531. [    0.912873] SW3A: 400 <--> 1975 mV at 1500 mV
  532. [    0.913695] SW3B: 400 <--> 1975 mV at 1500 mV
  533. [    0.914515] SW4: override max_uV, 3300000 -> 1975000
  534. [    0.914530] SW4: 800 <--> 1975 mV at 1800 mV
  535. [    0.915338] SWBST: 5000 <--> 5150 mV at 5000 mV
  536. [    0.916578] VSNVS: 1000 <--> 3000 mV at 3000 mV
  537. [    0.916818] VREFDDR: override min_uV, 1 -> 750000
  538. [    0.916830] VREFDDR: override max_uV, 2147483647 -> 750000
  539. [    0.917435] VREFDDR: 750 mV
  540. [    0.918224] VGEN1: 800 <--> 1550 mV at 800 mV
  541. [    0.919031] VGEN2: 800 <--> 1550 mV at 1500 mV
  542. [    0.919832] VGEN3: 1800 <--> 3300 mV at 1800 mV
  543. [    0.920644] VGEN4: 1800 <--> 3300 mV at 1800 mV
  544. [    0.921465] VGEN5: 1800 <--> 3300 mV at 2500 mV
  545. [    0.922279] VGEN6: 1800 <--> 3300 mV at 2800 mV
  546. [    0.998470] Serial: IMX driver
  547. [    0.999066] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX
  548. [    0.999607] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX
  549. [    1.000176] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX
  550. [    1.000675] [drm] Initialized drm 1.1.0 20060810
  551. [    1.167721] Galcore version 4.6.9.9754
  552. [    1.167767] galcore 130000.gpu: Looking up pu-supply from device tree
  553. [    1.189204] ipu_smfc_init: ioremap 0x02650000 -> f00ce000
  554. [    1.189727] imx-ipuv3 2400000.ipu: IPUv3H probed
  555. [    1.190080] ipu_smfc_init: ioremap 0x02a50000 -> f011e000
  556. [    1.190582] imx-ipuv3 2800000.ipu: IPUv3H probed
  557. [    1.198488] brd: module loaded
  558. [    1.202498] loop: module loaded
  559. [    1.203017] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1025, using 00000024
  560. [    1.203054] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000
  561. [    1.203084] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 8, using 00002800
  562. [    1.203115] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
  563. [    1.203173] ahci-imx 2200000.sata: Looking up target-supply from device tree
  564. [    1.206061] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
  565. [    1.206116] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  566. [    1.206152] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
  567. [    1.207671] scsi host0: ahci_platform
  568. [    1.208086] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
  569. [    1.210434] spi_imx 2010000.ecspi: probed
  570. [    1.211851] libphy: Fixed MDIO Bus: probed
  571. [    1.213189] fec 2188000.ethernet: Looking up phy-supply from device tree
  572. [    1.213208] fec 2188000.ethernet: Looking up phy-supply property in node /soc/aips-bus@02100000/ethernet@02188000 failed
  573. [    1.213232] 2188000.ethernet supply phy not found, using dummy regulator
  574. [    1.233564] fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
  575. [    1.233621] fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: 02:c1:4d:81:c8:26
  576. [    1.237471] libphy: fec_enet_mii_bus: probed
  577. [    1.238074] fec 2188000.ethernet eth0: registered PHC device 0
  578. [    1.238403] ath9k 0000:01:00.0: enabling device (0140 -> 0142)
  579. [    1.248330] ath: EEPROM regdomain: 0x60
  580. [    1.248342] ath: EEPROM indicates we should expect a direct regpair map
  581. [    1.248357] ath: Country alpha2 being used: 00
  582. [    1.248363] ath: Regpair used: 0x60
  583. [    1.256431] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  584. [    1.257926] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xf0300000, irq=155
  585. [    1.258068] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  586. [    1.258168] usbcore: registered new interface driver pegasus
  587. [    1.258261] usbcore: registered new interface driver asix
  588. [    1.258337] usbcore: registered new interface driver ax88179_178a
  589. [    1.258410] usbcore: registered new interface driver cdc_ether
  590. [    1.258480] usbcore: registered new interface driver cdc_eem
  591. [    1.258572] usbcore: registered new interface driver smsc75xx
  592. [    1.258666] usbcore: registered new interface driver smsc95xx
  593. [    1.258745] usbcore: registered new interface driver net1080
  594. [    1.258819] usbcore: registered new interface driver cdc_subset
  595. [    1.258928] usbcore: registered new interface driver cdc_ncm
  596. [    1.258989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  597. [    1.259017] ehci-pci: EHCI PCI platform driver
  598. [    1.259100] ehci-platform: EHCI generic platform driver
  599. [    1.259542] usbcore: registered new interface driver usb-storage
  600. [    1.259708] usbcore: registered new interface driver usbserial
  601. [    1.259769] usbcore: registered new interface driver usbserial_generic
  602. [    1.259837] usbserial: USB Serial support registered for generic
  603. [    1.259911] usbcore: registered new interface driver usb_serial_simple
  604. [    1.259970] usbserial: USB Serial support registered for zio
  605. [    1.260025] usbserial: USB Serial support registered for funsoft
  606. [    1.260081] usbserial: USB Serial support registered for flashloader
  607. [    1.260138] usbserial: USB Serial support registered for vivopay
  608. [    1.260194] usbserial: USB Serial support registered for moto_modem
  609. [    1.260250] usbserial: USB Serial support registered for hp4x
  610. [    1.260305] usbserial: USB Serial support registered for suunto
  611. [    1.260359] usbserial: USB Serial support registered for siemens_mpi
  612. [    1.261791] imx_usb 2184000.usb: Looking up vbus-supply from device tree
  613. [    1.262095] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, lpm: 0; cap: f012e100 op: f012e140
  614. [    1.265087] ci_hdrc ci_hdrc.0: It is OTG capable controller
  615. [    1.266040] imx_usb 2184200.usb: Looking up vbus-supply from device tree
  616. [    1.266315] ci_hdrc ci_hdrc.1: ChipIdea HDRC found, lpm: 0; cap: f0136300 op: f0136340
  617. [    1.269825] ci_hdrc ci_hdrc.1: doesn't support gadget
  618. [    1.269864] ci_hdrc ci_hdrc.1: EHCI Host Controller
  619. [    1.269908] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  620. [    1.282537] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  621. [    1.282772] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  622. [    1.282803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  623. [    1.282830] usb usb1: Product: EHCI Host Controller
  624. [    1.282852] usb usb1: Manufacturer: Linux 3.17.0-rc5-00217-gfd79638 ehci_hcd
  625. [    1.282875] usb usb1: SerialNumber: ci_hdrc.1
  626. [    1.283647] hub 1-0:1.0: USB hub found
  627. [    1.283705] hub 1-0:1.0: 1 port detected
  628. [    1.284665] mousedev: PS/2 mouse device common for all mice
  629. [    1.285244] input: 20b8000.kpp as /devices/soc0/soc/2000000.aips-bus/20b8000.kpp/input/input0
  630. [    1.285295] input input0: too many keys pressed, control pins initialisation
  631. [    1.342512] input: failed to attach handler kbd to device input0, error: -5
  632. [    1.343063] usbcore: registered new interface driver appletouch
  633. [    1.343187] usbcore: registered new interface driver bcm5974
  634. [    1.343531] rtc-pcf8523: probe of 0-0068 failed with error -5
  635. [    1.344140] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
  636. [    1.344302] i2c /dev entries driver
  637. [    1.349587] sbs-battery 0-000b: sbs_probe: Failed to get device status
  638. [    1.349626] sbs-battery: probe of 0-000b failed with error -5
  639. [    1.351671] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  640. [    1.351925] usbcore: registered new interface driver bcm203x
  641. [    1.352025] usbcore: registered new interface driver btusb
  642. [    1.352122] usbcore: registered new interface driver ath3k
  643. [    1.352327] sdhci: Secure Digital Host Controller Interface driver
  644. [    1.352350] sdhci: Copyright(c) Pierre Ossman
  645. [    1.352375] sdhci-pltfm: SDHCI platform and OF driver helper
  646. [    1.353266] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
  647. [    1.354488] sdhci-esdhc-imx 2194000.usdhc: Looking up vmmc-supply from device tree
  648. [    1.354508] sdhci-esdhc-imx 2194000.usdhc: Looking up vmmc-supply property in node /soc/aips-bus@02100000/usdhc@02194000 failed
  649. [    1.354534] sdhci-esdhc-imx 2194000.usdhc: Looking up vqmmc-supply from device tree
  650. [    1.354548] sdhci-esdhc-imx 2194000.usdhc: Looking up vqmmc-supply property in node /soc/aips-bus@02100000/usdhc@02194000 failed
  651. [    1.354561] sdhci-esdhc-imx 2194000.usdhc: No vmmc regulator found
  652. [    1.354586] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
  653. [    1.355858] sdhci-esdhc-imx 2194000.usdhc: Looking up card-external-vcc-supply from device tree
  654. [    1.355877] sdhci-esdhc-imx 2194000.usdhc: Looking up card-external-vcc-supply property in node /soc/aips-bus@02100000/usdhc@02194000 failed
  655. [    1.355890] 2194000.usdhc supply card-external-vcc not found, using dummy regulator
  656. [    1.452539] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  657. [    1.452972] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  658. [    1.453178] sdhci-esdhc-imx 2198000.usdhc: Looking up vmmc-supply from device tree
  659. [    1.453199] sdhci-esdhc-imx 2198000.usdhc: Looking up vmmc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 failed
  660. [    1.453220] sdhci-esdhc-imx 2198000.usdhc: Looking up vqmmc-supply from device tree
  661. [    1.453235] sdhci-esdhc-imx 2198000.usdhc: Looking up vqmmc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 failed
  662. [    1.453249] sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found
  663. [    1.453274] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
  664. [    1.453583] sdhci-esdhc-imx 2198000.usdhc: Looking up card-external-vcc-supply from device tree
  665. [    1.453601] sdhci-esdhc-imx 2198000.usdhc: Looking up card-external-vcc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 failed
  666. [    1.453618] 2198000.usdhc supply card-external-vcc not found, using dummy regulator
  667. [    1.552520] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  668. [    1.553298] ledtrig-cpu: registered to indicate activity on CPUs
  669. [    1.553453] hidraw: raw HID events driver (C) Jiri Kosina
  670. [    1.553786] usbcore: registered new interface driver usbhid
  671. [    1.553810] usbhid: USB HID core driver
  672. [    1.557720] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  673. [    1.557749] [drm] No driver support for vblank timestamp query.
  674. [    1.557902] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops)
  675. [    1.558023] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops)
  676. [    1.558128] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops)
  677. [    1.558233] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops)
  678. [    1.558496] imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  679. [    1.558966] imx-drm display-subsystem: bound 120000.hdmi (ops hdmi_ops)
  680. [    1.559217] imx-ldb 2000000.aips-bus:ldb@020e0008: dual-channel mode, ignoring second output
  681. [    1.559261] imx-drm display-subsystem: bound 2000000.aips-bus:ldb@020e0008 (ops imx_ldb_ops)
  682. [    1.602594] usb 1-1: new high-speed USB device number 2 using ci_hdrc
  683. [    1.622400] mmc1: host does not support reading read-only switch. assuming write-enable.
  684. [    1.629800] mmc1: new high speed SDHC card at address e624
  685. [    1.630241] mmcblk0: mmc1:e624 SU04G 3.69 GiB
  686. [    1.631597]  mmcblk0: p1 p2 p3
  687. [    1.651130] Console: switching to colour frame buffer device 240x67
  688. [    1.665028] imx-drm display-subsystem: fb0:  frame buffer device
  689. [    1.665112] imx-drm display-subsystem: registered panic notifier
  690. [    1.692518] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0
  691. [    1.695705] es8328 2-0011: Looking up DVDD-supply from device tree
  692. [    1.695800] es8328 2-0011: Looking up AVDD-supply from device tree
  693. [    1.695878] es8328 2-0011: Looking up PVDD-supply from device tree
  694. [    1.695942] es8328 2-0011: Looking up HPVDD-supply from device tree
  695. [    1.697391] imx-es8328 sound: Looking up audio-amp-supply from device tree
  696. [    1.705016] imx-es8328 sound: es8328-hifi-analog <-> 2028000.ssi mapping ok
  697. [    1.754411] usb 1-1: New USB device found, idVendor=05e3, idProduct=0614
  698. [    1.754519] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  699. [    1.754619] usb 1-1: Product: USB2.0 Hub Charger
  700. [    1.755633] hub 1-1:1.0: USB hub found
  701. [    1.756038] hub 1-1:1.0: 4 ports detected
  702. [    1.815576] input: imx-audio-es8328 Headphone Jack as /devices/soc0/sound/sound/card1/input1
  703. [    1.816283] TCP: cubic registered
  704. [    1.816369] NET: Registered protocol family 17
  705. [    1.816591] Bluetooth: RFCOMM socket layer initialized
  706. [    1.816686] Bluetooth: RFCOMM ver 1.11
  707. [    1.816760] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  708. [    1.816845] Bluetooth: BNEP socket layer initialized
  709. [    1.816922] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  710. [    1.817009] Bluetooth: HIDP socket layer initialized
  711. [    1.818238] cpu cpu0: Looking up arm-supply from device tree
  712. [    1.818312] cpu cpu0: Looking up pu-supply from device tree
  713. [    1.818386] cpu cpu0: Looking up soc-supply from device tree
  714. [    1.819447] ThumbEE CPU extension supported.
  715. [    1.819518] Registering SWP/SWPB emulation handler
  716. [    1.820004] registered taskstats version 1
  717. [    1.820987] input: gpio-keys as /devices/soc0/gpio-keys/input/input2
  718. [    1.821287] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 2016-08-06 13:51:41 UTC (1470491501)
  719. [    1.827521] PM: Checking hibernation image partition /dev/sda2
  720. [    2.032979] usb 1-1.1: new high-speed USB device number 3 using ci_hdrc
  721. [    2.143331] usb 1-1.1: New USB device found, idVendor=050d, idProduct=0234
  722. [    2.143535] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  723. [    2.145095] hub 1-1.1:1.0: USB hub found
  724. [    2.153216] hub 1-1.1:1.0: 4 ports detected
  725. [    2.242962] usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
  726. [    2.354586] usb 1-1.2: New USB device found, idVendor=0b95, idProduct=772b
  727. [    2.362548] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  728. [    2.370517] usb 1-1.2: Product: AX88772B
  729. [    2.378479] usb 1-1.2: Manufacturer: ASIX Elec. Corp.
  730. [    2.386121] usb 1-1.2: SerialNumber: 000001
  731. [    2.715194] asix 1-1.2:1.0 eth1: register 'asix' at usb-ci_hdrc.1-1.2, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:87:72:01
  732. [    2.802957] usb 1-1.3: new high-speed USB device number 5 using ci_hdrc
  733. [    2.914714] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0614
  734. [    2.922711] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  735. [    2.930620] usb 1-1.3: Product: USB2.0 Hub Charger
  736. [    2.940110] hub 1-1.3:1.0: USB hub found
  737. [    2.948220] hub 1-1.3:1.0: 4 ports detected
  738. [    3.032920] usb 1-1.4: new full-speed USB device number 6 using ci_hdrc
  739. [    3.145071] usb 1-1.4: string descriptor 0 read error: -22
  740. [    3.152903] usb 1-1.4: New USB device found, idVendor=13d3, idProduct=3393
  741. [    3.160676] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  742. [    3.170566] usb 1-1.4: Direct firmware load for ar3k/AthrBT_0x11020000.dfu failed with error -2
  743. [    3.178193] Bluetooth: Patch file not found ar3k/AthrBT_0x11020000.dfu
  744. [    3.185741] Bluetooth: Loading patch file failed
  745. [    3.193210] ath3k: probe of 1-1.4:1.0 failed with error -2
  746. [    3.282798] usb 1-1.1.2: new low-speed USB device number 7 using ci_hdrc
  747. [    3.427331] usb 1-1.1.2: New USB device found, idVendor=045e, idProduct=07b6
  748. [    3.434971] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  749. [    3.442557] usb 1-1.1.2: Product: Comfort Curve Keyboard 3000
  750. [    3.450004] usb 1-1.1.2: Manufacturer: Microsoft
  751. [    3.465734] input: Microsoft Comfort Curve Keyboard 3000 as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:045E:07B6.0001/input/input3
  752. [    3.470207] hid-generic 0003:045E:07B6.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-ci_hdrc.1-1.1.2/input0
  753. [    3.483229] input: Microsoft Comfort Curve Keyboard 3000 as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/0003:045E:07B6.0002/input/input4
  754. [    3.487826] hid-generic 0003:045E:07B6.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-ci_hdrc.1-1.1.2/input1
  755. [    3.572853] usb 1-1.1.3: new low-speed USB device number 8 using ci_hdrc
  756. [    3.708468] usb 1-1.1.3: New USB device found, idVendor=046d, idProduct=c03e
  757. [    3.716631] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  758. [    3.724944] usb 1-1.1.3: Product: USB-PS/2 Optical Mouse
  759. [    3.733180] usb 1-1.1.3: Manufacturer: Logitech
  760. [    3.747806] input: Logitech USB-PS/2 Optical Mouse as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:046D:C03E.0003/input/input5
  761. [    3.757512] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-ci_hdrc.1-1.1.3/input0
  762. [    4.072598] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  763. [    4.081592] ata1.00: supports DRM functions and may not be fully accessible
  764. [    4.090410] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
  765. [    4.099194] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
  766. [    4.108443] ata1.00: supports DRM functions and may not be fully accessible
  767. [    4.117384] ata1.00: configured for UDMA/133
  768. [    4.126893] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  CB6Q PQ: 0 ANSI: 5
  769. [    4.137294] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  770. [    4.146973] sd 0:0:0:0: [sda] Write Protect is off
  771. [    4.155627] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  772. [    4.155860] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  773. [    4.167173]  sda: sda1
  774. [    4.175797] sd 0:0:0:0: [sda] Attached SCSI disk
  775. [    4.180406] PM: Hibernation image partition 8:2 present
  776. [    4.180417] PM: Looking for hibernation image.
  777. [    4.180464] PM: Image not found (code -6)
  778. [    4.180472] PM: Hibernation image not present or could not be loaded.
  779. [    4.180524] SW4: disabling
  780. [    4.185065] lcd-display-power: disabling
  781. [    4.189672] usb_otg_vbus: disabling
  782. [    4.194512] ALSA device list:
  783. [    4.198999]   #0: DW-HDMI rev 0x0a, irq 147
  784. [    4.203490]   #1: imx-audio-es8328
  785. [    4.216468] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
  786. [    4.221619] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
  787. [    4.239842] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  788. [    4.244417] VFS: Mounted root (ext4 filesystem) on device 179:3.
  789. [    4.249815] devtmpfs: mounted
  790. [    4.254799] Freeing unused kernel memory: 524K (c0a02000 - c0a85000)
  791. [    5.220835] random: nonblocking pool is initialized
  792. [    5.618619] pstore: decompression failed;returned -5
  793. [    5.685606] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  794. [    5.695342] systemd[1]: Detected architecture 'arm'.
  795. [    5.818367] NET: Registered protocol family 10
  796. [    5.824422] systemd[1]: Inserted module 'ipv6'
  797. [    5.838272] systemd[1]: Set hostname to <novena-philips-speed>.
  798. [    6.506089] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  799. [    6.511037] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  800. [    6.515697] systemd[1]: Expecting device dev-ttymxc1.device...
  801. [    6.525479] systemd[1]: Starting Remote File Systems (Pre).
  802. [    6.535281] systemd[1]: Reached target Remote File Systems (Pre).
  803. [    6.540051] systemd[1]: Starting Encrypted Volumes.
  804. [    6.549808] systemd[1]: Reached target Encrypted Volumes.
  805. [    6.554576] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  806. [    6.564855] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  807. [    6.569589] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  808. [    6.576311] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  809. [    6.580192] systemd[1]: Starting Paths.
  810. [    6.588246] systemd[1]: Reached target Paths.
  811. [    6.591946] systemd[1]: Expecting device dev-disk-by\x2dpath-platform\x2d2198000.usdhc\x2dpart2.device...
  812. [    6.599548] systemd[1]: Expecting device dev-disk-by\x2dpath-platform\x2d2198000.usdhc\x2dpart1.device...
  813. [    6.607046] systemd[1]: Starting Root Slice.
  814. [    6.650551] systemd[1]: Created slice Root Slice.
  815. [    6.654205] systemd[1]: Starting User and Session Slice.
  816. [    6.662357] systemd[1]: Created slice User and Session Slice.
  817. [    6.665813] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  818. [    6.673538] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  819. [    6.676974] systemd[1]: Starting Delayed Shutdown Socket.
  820. [    6.684237] systemd[1]: Listening on Delayed Shutdown Socket.
  821. [    6.687646] systemd[1]: Starting Journal Socket (/dev/log).
  822. [    6.695007] systemd[1]: Listening on Journal Socket (/dev/log).
  823. [    6.697787] systemd[1]: Starting Syslog Socket.
  824. [    6.703766] systemd[1]: Listening on Syslog Socket.
  825. [    6.706581] systemd[1]: Starting udev Control Socket.
  826. [    6.712425] systemd[1]: Listening on udev Control Socket.
  827. [    6.715228] systemd[1]: Starting udev Kernel Socket.
  828. [    6.721095] systemd[1]: Listening on udev Kernel Socket.
  829. [    6.723981] systemd[1]: Starting Journal Socket.
  830. [    6.729904] systemd[1]: Listening on Journal Socket.
  831. [    6.732756] systemd[1]: Starting System Slice.
  832. [    6.739311] systemd[1]: Created slice System Slice.
  833. [    6.742095] systemd[1]: Started File System Check on Root Device.
  834. [    6.744844] systemd[1]: Starting system-systemd\x2dfsck.slice.
  835. [    6.751224] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  836. [    6.753943] systemd[1]: Starting system-serial\x2dgetty.slice.
  837. [    6.760324] systemd[1]: Created slice system-serial\x2dgetty.slice.
  838. [    6.763019] systemd[1]: Starting system-getty.slice.
  839. [    6.769366] systemd[1]: Created slice system-getty.slice.
  840. [    6.772041] systemd[1]: Starting Nameserver information manager...
  841. [    6.789918] systemd[1]: Started Set Up Additional Binary Formats.
  842. [    6.821550] systemd[1]: Starting Load Kernel Modules...
  843. [    6.832191] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  844. [    6.844472] systemd[1]: Mounting Debug File System...
  845. [    6.856238] systemd[1]: Mounted Huge Pages File System.
  846. [    6.861067] systemd[1]: Starting udev Coldplug all Devices...
  847. [    6.873588] systemd[1]: Mounted POSIX Message Queue File System.
  848. [    6.877350] systemd[1]: Starting LSB: Set keymap...
  849. [    6.889779] systemd[1]: Starting Journal Service...
  850. [    6.906469] systemd[1]: Started Journal Service.
  851. [    7.201293] systemd-udevd[175]: starting version 215
  852. [    7.667222] EXT4-fs (mmcblk0p3): re-mounted. Opts: barrier=1,errors=remount-ro
  853. [    7.924151] mma8452: probe of 0-001c failed with error -5
  854. [    7.926533] it6251 2-005c: Looking up power-supply from device tree
  855. [    8.084521] Adding 32764k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:32764k SSFS
  856. [    8.133590] it6251 2-005c: Error -5 reading from subaddress 0x0
  857. [    8.136997] it6251 2-005c: Error -5 reading from subaddress 0x1
  858. [    8.141805] it6251 2-005c: Error -5 reading from subaddress 0x2
  859. [    8.148613] it6251 2-005c: Error -5 reading from subaddress 0x3
  860. [    8.353532] it6251 2-005c: Error -5 reading from subaddress 0x0
  861. [    8.360425] it6251 2-005c: Error -5 reading from subaddress 0x1
  862. [    8.366824] it6251 2-005c: Error -5 reading from subaddress 0x2
  863. [    8.371258] it6251 2-005c: Error -5 reading from subaddress 0x3
  864. [    8.572807] it6251 2-005c: Error -5 reading from subaddress 0x0
  865. [    8.575588] it6251 2-005c: Error -5 reading from subaddress 0x1
  866. [    8.578220] it6251 2-005c: Error -5 reading from subaddress 0x2
  867. [    8.580808] it6251 2-005c: Error -5 reading from subaddress 0x3
  868. [    8.765602] systemd-journald[142]: Received request to flush runtime journal from PID 1
  869. [    8.783024] it6251 2-005c: Error -5 reading from subaddress 0x0
  870. [    8.786211] it6251 2-005c: Error -5 reading from subaddress 0x1
  871. [    8.789289] it6251 2-005c: Error -5 reading from subaddress 0x2
  872. [    8.792586] it6251 2-005c: Error -5 reading from subaddress 0x3
  873. [    8.992846] it6251 2-005c: Error -5 reading from subaddress 0x0
  874. [    9.000068] it6251 2-005c: Error -5 reading from subaddress 0x1
  875. [    9.006930] it6251 2-005c: Error -5 reading from subaddress 0x2
  876. [    9.013939] it6251 2-005c: Error -5 reading from subaddress 0x3
  877. [    9.220320] it6251 2-005c: well, we're unable to read product id, deferring
  878. [    9.227047] it6251 2-005c: unable to power up chip
  879. [    9.233656] ------------[ cut here ]------------
  880. [    9.240162] WARNING: CPU: 0 PID: 237 at drivers/regulator/core.c:1933 _regulator_disable+0xec/0x15c()
  881. [    9.246844] unbalanced disables for lcd-display-power
  882. [    9.253249] Modules linked in: it6251(+) mma8452 industrialio_triggered_buffer kfifo_buf industrialio ipv6
  883. [    9.260009] CPU: 0 PID: 237 Comm: systemd-udevd Not tainted 3.17.0-rc5-00217-gfd79638 #276
  884. [    9.266733] [<c001894c>] (unwind_backtrace) from [<c00130a8>] (show_stack+0x20/0x24)
  885. [    9.273792] [<c00130a8>] (show_stack) from [<c072492c>] (dump_stack+0xa0/0xd8)
  886. [    9.280793] [<c072492c>] (dump_stack) from [<c003229c>] (warn_slowpath_common+0x84/0xa0)
  887. [    9.287873] [<c003229c>] (warn_slowpath_common) from [<c00322f8>] (warn_slowpath_fmt+0x40/0x48)
  888. [    9.295281] [<c00322f8>] (warn_slowpath_fmt) from [<c03666d0>] (_regulator_disable+0xec/0x15c)
  889. [    9.302356] [<c03666d0>] (_regulator_disable) from [<c0366780>] (regulator_disable+0x40/0x74)
  890. [    9.310310] [<c0366780>] (regulator_disable) from [<bf07d474>] (it6251_probe+0xe4/0x1b4 [it6251])
  891. [    9.318676] [<bf07d474>] (it6251_probe [it6251]) from [<c0505338>] (i2c_device_probe+0xc0/0xe4)
  892. [    9.327467] [<c0505338>] (i2c_device_probe) from [<c03eabc0>] (driver_probe_device+0x118/0x24c)
  893. [    9.334697] [<c03eabc0>] (driver_probe_device) from [<c03eade4>] (__driver_attach+0x9c/0xa0)
  894. [    9.341798] [<c03eade4>] (__driver_attach) from [<c03e8e00>] (bus_for_each_dev+0x7c/0xb0)
  895. [    9.345318] [<c03e8e00>] (bus_for_each_dev) from [<c03ea668>] (driver_attach+0x2c/0x30)
  896. [    9.348088] [<c03ea668>] (driver_attach) from [<c03ea2e0>] (bus_add_driver+0x15c/0x204)
  897. [    9.350734] [<c03ea2e0>] (bus_add_driver) from [<c03eb6ec>] (driver_register+0x88/0x108)
  898. [    9.354250] [<c03eb6ec>] (driver_register) from [<c0504504>] (i2c_register_driver+0x40/0xc8)
  899. [    9.356775] [<c0504504>] (i2c_register_driver) from [<bf080020>] (it6251_driver_init+0x20/0x24 [it6251])
  900. [    9.359733] [<bf080020>] (it6251_driver_init [it6251]) from [<c00089a0>] (do_one_initcall+0x9c/0x1d4)
  901. [    9.362972] ---[ end trace d87749ad28e17808 ]---
  902. [    9.365485] it6251 2-005c: unable to disable regulator
  903. [    9.368709] it6251 2-005c: Returning error: -517
  904. [    9.372065] i2c 2-005c: Driver it6251 requests probe deferral
  905. [   14.498635] vgaarb: this pci device is not a vga device
  906. [   14.665204] vgaarb: this pci device is not a vga device
  907. [   14.782617] imx-ipuv3 2400000.ipu: DC stop timeout after 50 ms
  908. [   15.033255] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet:07, irq=-1)
  909. [   15.033525] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  910. [   15.130455] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  911. [   15.398935] input input0: too many keys pressed, control pins initialisation
  912. [   16.247548] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  913. [   17.444684] cfg80211: Calling CRDA to update world regulatory domain
  914. [   17.546708] cfg80211: World regulatory domain updated:
  915. [   17.546728] cfg80211:  DFS Master region: unset
  916. [   17.546735] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  917. [   17.546749] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  918. [   17.546758] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  919. [   17.546766] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  920. [   17.546775] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
  921. [   17.546784] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  922. [   17.546792] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  923. [   17.546800] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  924. [   17.546809] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  925. [   18.047741] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  926. [   18.049298] asix 1-1.2:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xCDE1
  927. [  213.743431] systemd-journald[142]: Failed to read ACL on /var/log/journal/6984266032cf404495ac5d3a454c757c/user-1000.journal, ignoring: Operation not supported
  928. [  217.098917] vgaarb: this pci device is not a vga device

Paste-bin is for source code and general debugging text.

Login or Register to edit, delete and keep track of your pastes and more.

Raw Paste

Login or Register to edit or fork this paste. It's free.