TEXT   38

athlon64 dmesg

Guest on 18th April 2022 05:55:33 PM

  1. Bootdata ok (command line is initrd=gentoo.igz root=/dev/ram0 init=/linuxrc looptype=zisofs loop=/zisofs cdroot vga=0x317 splash=silent BOOT_IMAGE=gentoo noapm nodhcp)
  2. Linux version 2.6.5-gentoo-up (root@jason64) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #1 Sun Apr 18 22:21:17 UTC 2004
  3. BIOS-provided physical RAM map:
  4.  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  5.  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  6.  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  7.  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
  8.  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
  9.  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
  10.  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  11.  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
  12.  BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
  13.  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
  14. ACPI: have wakeup address 0x10000001000
  15. No mptable found.
  16. No mptable found.
  17. On node 0 totalpages: 131056
  18.   DMA zone: 4096 pages, LIFO batch:1
  19.   Normal zone: 126960 pages, LIFO batch:16
  20.   HighMem zone: 0 pages, LIFO batch:1
  21. PCI bridge 00:0a from 10de found. Setting "noapic". Overwrite with "apic"
  22. ACPI: RSDP (v000 AOpen                                     ) @ 0x00000000000f7070
  23. ACPI: RSDT (v001 AOpen  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff3000
  24. ACPI: FADT (v001 AOpen  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff3040
  25. ACPI: MADT (v001 AOpen  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff8540
  26. ACPI: DSDT (v001 AOPEN  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
  27. ACPI: Local APIC address 0xfee00000
  28. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  29. Processor #0 15:4 APIC version 16
  30. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  31. ACPI: Skipping IOAPIC probe due to 'noapic' option.
  32. Using ACPI for processor (LAPIC) configuration information
  33. Intel MultiProcessor Specification v1.4
  34.     Virtual Wire compatibility mode.
  35. OEM ID: OEM00000 <6>Product ID: PROD00000000 <6>APIC at: 0xFEE00000
  36. I/O APIC #2 Version 17 at 0xFEC00000.
  37. Processors: 1
  38. Checking aperture...
  39. CPU 0: aperture @ c0000000 size 256 MB
  40. Built 1 zonelists
  41. Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc looptype=zisofs loop=/zisofs cdroot vga=0x317 splash=silent BOOT_IMAGE=gentoo noapm nodhcp console=tty0
  42. bootsplash: silent mode.
  43. Initializing CPU#0
  44. PID hash table entries: 16 (order 4: 256 bytes)
  45. time.c: Using 1.193182 MHz PIT timer.
  46. time.c: Detected 2000.043 MHz processor.
  47. Console: colour dummy device 80x25
  48. Memory: 507924k/524224k available (3315k kernel code, 15564k reserved, 1421k data, 188k init)
  49. Calibrating delay loop... 3964.92 BogoMIPS
  50. Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
  51. Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
  52. Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
  53. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
  54. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  55. CPU: L2 Cache: 1024K (64 bytes/line)
  56. CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08
  57. POSIX conformance testing by UNIFIX
  58. Using local APIC NMI watchdog using perfctr0
  59. Using local APIC timer interrupts.
  60. Detected 12.500 MHz APIC timer.
  61. NET: Registered protocol family 16
  62. PCI: Using configuration type 1
  63. mtrr: v2.0 (20020519)
  64. ACPI: Subsystem revision 20040326
  65. ACPI: IRQ9 SCI: Edge set to Level Trigger.
  66. ACPI: Interpreter enabled
  67. ACPI: Using PIC for interrupt routing
  68. ACPI: PCI Root Bridge [PCI0] (00:00)
  69. PCI: Probing PCI hardware (bus 00)
  70. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  71. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  72. ACPI: Power Resource [ISAV] (on)
  73. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
  74. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  75. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  76. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  77. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15)
  78. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 *12 14 15)
  79. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
  80. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
  81. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15)
  82. ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15)
  83. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  84. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15)
  85. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  86. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 *12 14 15)
  87. ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15)
  88. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15)
  89. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15)
  90. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15)
  91. ACPI: PCI Interrupt Link [APC1] (IRQs *16)
  92. ACPI: PCI Interrupt Link [APC2] (IRQs *17)
  93. ACPI: PCI Interrupt Link [APC3] (IRQs *18)
  94. ACPI: PCI Interrupt Link [APC4] (IRQs 19)
  95. ACPI: PCI Interrupt Link [APC5] (IRQs *16)
  96. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
  97. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
  98. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
  99. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
  100. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
  101. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
  102. ACPI: PCI Interrupt Link [APCS] (IRQs *23)
  103. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
  104. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
  105. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
  106. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
  107. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22)
  108. SCSI subsystem initialized
  109. drivers/usb/core/usb.c: registered new driver usbfs
  110. drivers/usb/core/usb.c: registered new driver hub
  111. ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 11
  112. ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 12
  113. ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 12
  114. ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 12
  115. ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
  116. ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
  117. ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
  118. ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
  119. ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 12
  120. PCI: Using ACPI for IRQ routing
  121. PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
  122. agpgart: Detected AGP bridge 0
  123. agpgart: Setting up Nforce3 AGP.
  124. agpgart: Maximum main memory to use for agp memory: 439M
  125. agpgart: AGP aperture is 256M @ 0xc0000000
  126. PCI-DMA: Disabling IOMMU.
  127. vesafb: framebuffer at 0xd0000000, mapped to 0xffffff000008f000, size 16384k
  128. vesafb: mode is 1024x768x16, linelength=2048, pages=1
  129. vesafb: scrolling: redraw
  130. vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
  131. fb0: VESA VGA frame buffer device
  132. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
  133. ikconfig 0.7 with /proc/config*
  134. devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
  135. devfs: boot_options: 0x0
  136. udf: registering filesystem
  137. SGI XFS with large block/inode numbers, no debug enabled
  138. Initializing Cryptographic API
  139. ACPI: Power Button (FF) [PWRF]
  140. ACPI: Fan [FAN] (on)
  141. ACPI: Processor [CPU0] (supports C1)
  142. ACPI: Thermal Zone [THRM] (41 C)
  143. mice: PS/2 mouse device common for all mice
  144. serio: i8042 AUX port at 0x60,0x64 irq 12
  145. serio: i8042 KBD port at 0x60,0x64 irq 1
  146. bootsplash 3.1.4-2004/02/19: looking for picture..... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
  147. Console: switching to colour frame buffer device 122x40
  148. Real Time Clock Driver v1.12
  149. Non-volatile memory driver v1.2
  150. Linux agpgart interface v0.100 (c) Dave Jones
  151. RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
  152. loop: loaded (max 8 devices)
  153. Compaq SMART2 Driver (v 2.6.0)
  154. Compaq CISS Driver (v 2.6.0)
  155. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  156. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  157. NFORCE3: IDE controller at PCI slot 0000:00:08.0
  158. NFORCE3: chipset revision 165
  159. NFORCE3: not 100% native mode: will probe irqs later
  160. NFORCE3: 0000:00:08.0 (rev a5) UDMA133 controller
  161.     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
  162.     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
  163. hdc: DVD-ROM DVD-16X6S, ATAPI CD/DVD-ROM drive
  164. hdd: Memorex 40MAXX 1248AJ, ATAPI CD/DVD-ROM drive
  165. Using anticipatory io scheduler
  166. ide1 at 0x170-0x177,0x376 on irq 15
  167. hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
  168. Uniform CD-ROM driver Revision: 3.20
  169. hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
  170. drivers/usb/core/usb.c: registered new driver hid
  171. drivers/usb/input/hid-core.c: v2.0:USB HID core driver
  172. md: linear personality registered as nr 1
  173. md: raid0 personality registered as nr 2
  174. md: raid1 personality registered as nr 3
  175. md: raid5 personality registered as nr 4
  176. raid5: measuring checksumming speed
  177.    generic_sse:  6104.000 MB/sec
  178. raid5: using function: generic_sse (6104.000 MB/sec)
  179. raid6: int64x1   1679 MB/s
  180. raid6: int64x2   2503 MB/s
  181. raid6: int64x4   2683 MB/s
  182. raid6: int64x8   1726 MB/s
  183. raid6: sse2x1     832 MB/s
  184. raid6: sse2x2    1175 MB/s
  185. raid6: sse2x4    1683 MB/s
  186. raid6: using algorithm sse2x4 (1683 MB/s)
  187. md: raid6 personality registered as nr 8
  188. md: multipath personality registered as nr 7
  189. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
  190. device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
  191. Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
  192. ALSA device list:
  193.   No soundcards found.
  194. NET: Registered protocol family 2
  195. IP: routing cache hash table of 4096 buckets, 32Kbytes
  196. TCP: Hash tables configured (established 32768 bind 32768)
  197. NET: Registered protocol family 1
  198. NET: Registered protocol family 10
  199. IPv6 over IPv4 tunneling driver
  200. NET: Registered protocol family 17
  201. powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.20.08b - March 20, 2004)
  202. powernow-k8: BIOS error - no PSB
  203. ACPI: (supports S0 S1 S4 S5)
  204. md: Autodetecting RAID arrays.
  205. md: autorun ...
  206. md: ... autorun DONE.
  207. RAMDISK: Compressed image found at block 0
  208. VFS: Mounted root (ext2 filesystem) readonly.
  209. Freeing unused kernel memory: 188k freed
  210. ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 USB 2.0
  211. PCI: Setting latency timer of device 0000:00:02.2 to 64
  212. ehci_hcd 0000:00:02.2: irq 12, pci mem ffffff000111c000
  213. ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
  214. PCI: cache line size of 64 is not supported by device 0000:00:02.2
  215. ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
  216. hub 1-0:1.0: USB hub found
  217. hub 1-0:1.0: 6 ports detected
  218. Initializing USB Mass Storage driver...
  219. drivers/usb/core/usb.c: registered new driver usb-storage
  220. USB Mass Storage support registered.
  221. ieee1394: Initialized config rom entry `ip1394'
  222. ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org>
  223. ohci1394: fw-host0: Unexpected PCI resource length of 1000!
  224. ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[d9001000-d90017ff]  Max Packet=[2048]
  225. sbp2: $Rev: 1170 $ Ben Collins <bcollins@debian.org>
  226. ISO 9660 Extensions: Microsoft Joliet Level 3
  227. Unable to load NLS charset iso8859-1
  228. Unable to load NLS charset iso8859-1
  229. ISO 9660 Extensions: RRIP_1991A
  230. ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000180139450dcf2]
  231. Disabled Privacy Extensions on device ffffffff80530dc0(lo)
  232. parport0: PC-style at 0x378 [PCSPP,TRISTATE]
  233. parport0: irq 7 detected
  234. r8169 Gigabit Ethernet driver 1.2 loaded
  235. r8169: PCI device 0000:02:05.0: unknown chip version, assuming RTL-8169
  236. r8169: PCI device 0000:02:05.0: TxConfig = 0x800000
  237. eth0: Identified chip type is 'RTL-8169'.
  238. eth0: RealTek RTL8169 Gigabit Ethernet at 0xffffff0001120000, 00:01:80:50:dc:f2, IRQ 10
  239. eth0: Auto-negotiation Enabled.
  240. libata version 1.02 loaded.
  241. sata_sil version 0.54
  242. ata1: SATA max UDMA/100 cmd 0xFFFFFF0001122080 ctl 0xFFFFFF000112208A bmdma 0xFFFFFF0001122000 irq 11
  243. ata2: SATA max UDMA/100 cmd 0xFFFFFF00011220C0 ctl 0xFFFFFF00011220CA bmdma 0xFFFFFF0001122008 irq 11
  244. ata3: SATA max UDMA/100 cmd 0xFFFFFF0001122280 ctl 0xFFFFFF000112228A bmdma 0xFFFFFF0001122200 irq 11
  245. ata4: SATA max UDMA/100 cmd 0xFFFFFF00011222C0 ctl 0xFFFFFF00011222CA bmdma 0xFFFFFF0001122208 irq 11
  246. ata1: no device found (phy stat 00000000)
  247. ata1: thread exiting
  248. scsi0 : sata_sil
  249. ata2: no device found (phy stat 00000000)
  250. ata2: thread exiting
  251. scsi1 : sata_sil
  252. ata3: no device found (phy stat 00000000)
  253. ata3: thread exiting
  254. scsi2 : sata_sil
  255. ata4: no device found (phy stat 00000000)
  256. ata4: thread exiting
  257. scsi3 : sata_sil
  258. PCI: Setting latency timer of device 0000:00:06.0 to 64
  259. intel8x0_measure_ac97_clock: measured 49551 usecs
  260. intel8x0: clocking to 47411
  261. ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  262. ohci_hcd: block sizes: ed 80 td 96
  263. ohci_hcd 0000:00:02.0: nVidia Corporation nForce3 USB 1.1
  264. PCI: Setting latency timer of device 0000:00:02.0 to 64
  265. ohci_hcd 0000:00:02.0: irq 12, pci mem ffffff0001126000
  266. ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  267. hub 2-0:1.0: USB hub found
  268. hub 2-0:1.0: 3 ports detected
  269. ohci_hcd 0000:00:02.1: nVidia Corporation nForce3 USB 1.1 (#2)
  270. PCI: Setting latency timer of device 0000:00:02.1 to 64
  271. ohci_hcd 0000:00:02.1: irq 12, pci mem ffffff0001128000
  272. ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
  273. hub 3-0:1.0: USB hub found
  274. hub 3-0:1.0: 3 ports detected
  275. usb 2-3: new low speed USB device using address 2
  276. input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-3
  277. input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3
  278. USB Universal Host Controller Interface driver v2.2
  279. bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3).
  280. bootsplash: status on console 0 changed to on
  281. bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3).
  282. bootsplash: status on console 1 changed to on
  283. bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3).
  284. bootsplash: status on console 2 changed to on
  285. bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3).
  286. bootsplash: status on console 3 changed to on
  287. bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3).
  288. bootsplash: status on console 4 changed to on
  289. bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3).
  290. bootsplash: status on console 5 changed to on
  291. eth0: no IPv6 routers present

Raw Paste


Login or Register to edit or fork this paste. It's free.