TEXT   83

i915 core 3

Guest on 3rd June 2022 01:41:22 AM

  1. Copyright (c)  The FreeBSD Project.
  2. Copyright (c) The Regents of the University of California. All rights reserved.
  3. FreeBSD is a registered trademark of The FreeBSD Foundation.
  4. FreeBSD 10.0-CURRENT #0: Sat Dec  8 18:14:15 PST
  5.     root@bhyve:/usr/obj/usr/src/sys/GENERIC amd64
  6. CPU: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz (3066.33-MHz K8-class CPU)
  7.   Origin = "GenuineIntel"  Id = 0x20655  Family = 0x6  Model = 0x25  Stepping = 5
  8.   Features=0x8fa3ab7f<FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,APIC,SEP,PGE,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS,PBE>
  9.   Features2=0x809ae215<SSE3,DTES64,DS_CPL,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,HV>
  10.   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  11.   AMD Features2=0x1<LAHF>
  12.   TSC: P-state invariant
  13. real memory  = 7516192768 (7168 MB)
  14. avail memory = 5076496384 (4841 MB)
  15. Event timer "LAPIC" quality 400
  16. ACPI APIC Table: <BHYVE  BVMADT  >
  17. FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  18. FreeBSD/SMP: 4 package(s) x 1 core(s)
  19.  cpu0 (BSP): APIC ID:  0
  20.  cpu1 (AP): APIC ID:  1
  21.  cpu2 (AP): APIC ID:  2
  22.  cpu3 (AP): APIC ID:  3
  23. ioapic0: Changing APIC ID to 4
  24. ioapic0 <Version 1.1> irqs 0-16 on motherboard
  25. module_register_init: MOD_LOAD (vesa, 0xffffffff80c19390, 0) error 19
  26. kbd0 at kbdmux0
  27. hpt27xx: RocketRAID 27xx controller driver v1.0 (Dec  8 2012 18:12:58)
  28. acpi0: <BHYVE BVXSDT> on motherboard
  29. atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
  30. Event timer "RTC" frequency 32768 Hz quality 0
  31. Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
  32. acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
  33. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  34. pci0: <ACPI PCI bus> on pcib0
  35. pcib0: no PRT entry for 0.31.INTA
  36. virtio_pci0: <VirtIO PCI Network adapter> port 0x2000-0x201f at device 1.0 on pci0
  37. vtnet0: <VirtIO Networking Adapter> on virtio_pci0
  38. virtio_pci0: host features: 0x18020 <Status,MrgRxBuf,MacAddress>
  39. virtio_pci0: negotiated features: 0x18020 <Status,MrgRxBuf,MacAddress>
  40. vtnet0: Ethernet address: 00:a0:98:15:da:c3
  41. virtio_pci1: <VirtIO PCI Block adapter> port 0x2040-0x207f at device 2.0 on pci0
  42. vtblk0: <VirtIO Block Adapter> on virtio_pci1
  43. virtio_pci1: host features: 0x10000004 <RingIndirect,MaxNumSegs>
  44. virtio_pci1: negotiated features: 0x10000004 <RingIndirect,MaxNumSegs>
  45. vtblk0: error getting device identifier: 5
  46. vtblk0: 20480MB (41943040 512 byte sectors)
  47. uart2: <16550 or compatible> port 0x3f8-0x3ff irq 4 at device 31.0 on pci0
  48. uart2: console (9600,n,8,1)
  49. ctl: CAM Target Layer loaded
  50. Timecounters tick every 10.000 msec
  51. hpt27xx: no controller detected.
  52. SMP: AP CPU #3 Launched!
  53. SMP: AP CPU #2 Launched!
  54. SMP: AP CPU #1 Launched!
  55. Trying to mount root from ufs:/dev/vtbd0p1 [rw]...

Raw Paste


Login or Register to edit or fork this paste. It's free.