TEXT 60

exim conf

Guest on 11th June 2022 05:38:10 PM

# This is the main exim configuration file.
# It was originally generated by `eximconfig', part of the exim package
# distributed with Debian, but it may edited by the mail system administrator.
# This file originally generated by eximconfig at Sat Apr
# See exim info section for details of the things that can be configured here.
# Please see the manual for a complete list
# of all the runtime configuration options that can be included in a
# configuration file.
# This file is divided into several parts, all but the last of which are
# terminated by a line containing the word "end". The parts must appear
# in the correct order, and all must be present (even if some of them are
# in fact empty). Blank lines, and lines starting with # are ignored.
######################################################################
# MAIN CONFIGURATION SETTINGS #
######################################################################
# Specify the domain you want to be added to all unqualified addresses
# here. Unqualified addresses are accepted only from local callers by
# default. See the receiver_unqualified_{hosts,nets} options if you want
# to permit unqualified addresses from remote sources. If this option is
# not set, the primary_hostname value is used for qualification.
qualify_domain =
# If you want unqualified recipient addresses to be qualified with a different
# domain to unqualified sender addresses, specify the recipient domain here.
# If this option is not set, the qualify_domain value is used.
# qualify_recipient =
# Specify your local domains as a colon-separated list here. If this option
# is not set (i.e. not mentioned in the configuration file), the
# qualify_recipient value is used as the only local domain. If you do not want
# to do any local deliveries, uncomment the following line, but do not supply
# any data for it. This sets local_domains to an empty string, which is not
# the same as not mentioning it at all. An empty string specifies that there
# are no local domains; not setting it at all causes the default value (the
# setting of qualify_recipient) to be used.
local_domains = dmprojects.com:localhost:srv
# Allow mail addressed to our hostname, or to our IP address.
local_domains_include_host = true
local_domains_include_host_literals = true
# Domains we relay for; that is domains that aren't considered local but we
# accept mail for them.
#relay_domains =
# If this is uncommented, we accept and relay mail for all domains we are
# in the DNS as an MX for.
#relay_domains_include_local_mx = true
# No local deliveries will ever be run under the uids of these users (a colon-
# separated list). An attempt to do so gets changed so that it runs under the
# uid of "nobody" instead. This is a paranoic safety catch. Note the default
# setting means you cannot deliver mail addressed to root as if it were a
# normal user. This isn't usually a problem, as most sites have an alias for
# root that redirects such mail to a human administrator.
never_users = root
# The setting below causes Exim to do a reverse DNS lookup on all incoming
# IP calls, in order to get the true host name. If you feel this is too
# expensive, you can specify the networks for which a lookup is done, or
# remove the setting entirely.
host_lookup = *
# The setting below would, if uncommented, cause Exim to check the syntax of
# all the headers that are supposed to contain email addresses (To:, From:,
# etc). This reduces the level of bounced bounces considerably.
# headers_check_syntax
# Exim contains support for the Realtime Blocking List (RBL), and the many
# similar services that are being maintained as part of the DNS. See
# http://www.mail-abuse.org/ for background. The line below, if uncommented,
# will reject mail from hosts in the RBL, and add warning headers to mail
# from hosts in a list of dynamic-IP dialups. Note that MAPS may charge
# for this service.
#rbl_domains = rbl.mail-abuse.org/reject : dialups.mail-abuse.org/warn
# http://www.rfc-ignorant.org is another interesting site with a number of
# services you can use with the rbl_domains option
# The setting below allows your host to be used as a mail relay by only
# the hosts in the specified networks. See the section of the manual
# entitled "Control of relaying" for more info.
host_accept_relay = 127.0.0.1 : ::::1 : 192.168.0.0/24
# This setting allows anyone who has authenticated to use your host as a
# mail relay. To use this you will need to set up some authenticators at
# the end of the file
host_auth_accept_relay = *
# If you want Exim to support the "percent hack" for all your local domains,
# uncomment the following line. This is the feature by which mail addressed
# to x%y@z (where z is one of your local domains) is locally rerouted to
# x@y and sent on. Otherwise x%y is treated as an ordinary local part
# percent_hack_domains=*
# If this option is set, then any process that is running as one of the
# listed users may pass a message to Exim and specify the sender's
# address using the "-f" command line option, without Exim's adding a
# "Sender" header.
trusted_users = mail
# If this option is true, the SMTP command VRFY is supported on incoming
# SMTP connections; otherwise it is not.
smtp_verify = true
# Some operating systems use the "gecos" field in the system password file
# to hold other information in addition to users' real names. Exim looks up
# this field when it is creating "sender" and "from" headers. If these options
# are set, exim uses "gecos_pattern" to parse the gecos field, and then
# expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
# by the pattern.
gecos_pattern = ^([^,:]*)
gecos_name = $1
# This sets the maximum number of messages that will be accepted in one
# connection and immediately delivered. If one connection sends more
# messages than this, any further ones are accepted and queued but not
# delivered. The default is 10, which is probably enough for most purposes,
# but is too low on dialup SMTP systems, which often have many more mails
# queued for them when they connect.
smtp_accept_queue_per_connection = 100
# Send a mail to the postmaster when a message is frozen. There are many
# reasons this could happen; one is if exim cannot deliver a mail with no
# return address (normally a bounce) another that may be common on dialup
# systems is if a DNS lookup of a smarthost fails. Read the documentation
# for more details: you might like to look at the auto_thaw option
freeze_tell_mailmaster = true
# This string defines the contents of the \`Received' message header that
# is added to each message, except for the timestamp, which is automatically
# added on at the end, preceded by a semicolon. The string is expanded each
# time it is used.
received_header_text = "Received: \
${if def:sender_rcvhost {from ${sender_rcvhost}\n\t}\
{${if def:sender_ident {from ${sender_ident} }}\
${if def:sender_helo_name {(helo=${sender_helo_name})\n\t}}}}\
by ${primary_hostname} \
${if def:received_protocol {with ${received_protocol}}} \
(Exim ${version_number} #${compile_number} (Debian))\n\t\
id ${message_id}\
${if def:received_for {\n\tfor <$received_for>}}"
# Attempt to verify recipient address before receiving mail, so that mails
# to invalid addresses are rejected rather than accepted and then bounced.
# Apparently some spammers are abusing servers that accept and then bounce
# to send bounces containing their spam to people.
receiver_try_verify = true
# This would make exim advertise the 8BIT-MIME option. According to
# RFC1652, this means it will take an 8bit message, and ensure it gets
# delivered correctly. exim won't do this: it is entirely 8bit clean
# but won't do any conversion if the next hop isn't. Therefore, if you
# set this option you are asking exim to lie and not be RFC
# compliant. But some people want it.
#accept_8bitmime = true
# This will cause it to accept mail only from the local interface
#local_interfaces = 127.0.0.1
# If this next line is uncommented, any user can see the mail queue
# by using the mailq command or exim -bp.
#queue_list_requires_admin = false
#
end
######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################
# This transport is used for local delivery to user mailboxes. On debian
# systems group mail is used so we can write to the /var/spool/mail
# directory. (The alternative, which most other unixes use, is to deliver
# as the user's own group, into a sticky-bitted directory)
local_delivery:
driver = appendfile
group = mail
mode = 0660
mode_fail_narrower = false
envelope_to_add = true
return_path_add = true
file = /var/spool/mail/${local_part}
# This transport is used for handling pipe addresses generated by
# alias or .forward files. If the pipe generates any standard output,
# it is returned to the sender of the message as a delivery error. Set
# return_fail_output instead if you want this to happen only when the
# pipe fails to complete normally.
address_pipe:
driver = pipe
path = /usr/bin:/bin:/usr/local/bin
return_output
# This transport is used for handling file addresses generated by alias
# or .forward files.
address_file:
driver = appendfile
envelope_to_add = true
return_path_add = true
# This transport is used for handling file addresses generated by alias
# or .forward files if the path ends in "/", which causes it to be treated
# as a directory name rather than a file name. Each message is then delivered
# to a unique file in the directory. If instead you want all such deliveries to
# be in the "maildir" format that is used by some other mail software,
# uncomment the final option below. If this is done, the directory specified
# in the .forward or alias file is the base maildir directory.
#
# Should you want to be able to specify either maildir or non-maildir
# directory-style deliveries, then you must set up yet another transport,
# called address_directory2. This is used if the path ends in "//" so should
# be the one used for maildir, as the double slash suggests another level
# of directory. In the absence of address_directory2, paths ending in //
# are passed to address_directory.
address_directory:
driver = appendfile
no_from_hack
prefix = ""
suffix = ""
# maildir_format
# This transport is used for handling autoreplies generated by the filtering
# option of the forwardfile director.
address_reply:
driver = autoreply
# This transport is used for procmail
procmail_pipe:
driver = pipe
command = "/usr/bin/procmail"
return_path_add
delivery_date_add
envelope_to_add
# check_string = "From "
# escape_string = ">From "
suffix = ""
# This transport is used for delivering messages over SMTP connections.
remote_smtp:
driver = smtp
# authenticate_hosts = smarthost.isp.com
# To use SMTP AUTH when sending to a particular host, such as your ISP's
# smarthost, uncomment and edit the above line, and also the example
# client-side authenticators at the bottom of the file
end
######################################################################
# DIRECTORS CONFIGURATION #
# Specifies how local addresses are handled #
######################################################################
# ORDER DOES MATTER #
# A local address is passed to each in turn until it is accepted. #
######################################################################
# This allows local delivery to be forced, avoiding alias files and
# forwarding.
real_local:
prefix = real-
driver = localuser
transport = local_delivery
# This director handles aliasing using a traditional /etc/aliases file.
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary.
system_aliases:
driver = aliasfile
file_transport = address_file
pipe_transport = address_pipe
file = /etc/aliases
search_type = lsearch
# user = list
# Uncomment the above line if you are running smartlist
# This director handles forwarding using traditional .forward files.
# It also allows mail filtering when a forward file starts with the
# string "# Exim filter": to disable filtering, uncomment the "filter"
# option. The check_ancestor option means that if the forward file
# generates an address that is an ancestor of the current one, the
# current one gets passed on instead. This covers the case where A is
# aliased to B and B has a .forward file pointing to A.
# For standard debian setup of one group per user, it is acceptable---normal
# even---for .forward to be group writable. If you have everyone in one
# group, you should comment out the "modemask" line. Without it, the exim
# default of 022 will apply, which is probably what you want.
userforward:
driver = forwardfile
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
no_verify
check_ancestor
check_local_user
file = .forward
modemask = 002
filter
# This director runs procmail for users who have a .procmailrc file
procmail:
driver = localuser
transport = procmail_pipe
require_files = ${local_part}:+${home}:+${home}/.procmailrc:+/usr/bin/procmail
no_verify
# This director matches local user mailboxes.
localuser:
driver = localuser
transport = local_delivery
end
######################################################################
# ROUTERS CONFIGURATION #
# Specifies how remote addresses are handled #
######################################################################
# ORDER DOES MATTER #
# A remote address is passed to each in turn until it is accepted. #
######################################################################
# Remote addresses are those with a domain that does not match any item
# in the "local_domains" setting above.
# This router routes to remote hosts over SMTP using a DNS lookup with
# default options.
lookuphost:
driver = lookuphost
transport = remote_smtp
# This router routes to remote hosts over SMTP by explicit IP address,
# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
# require this facility, which is why it is enabled by default in Exim.
# If you want to lock it out, set forbid_domain_literals in the main
# configuration section above.
literal:
driver = ipliteral
transport = remote_smtp
end
######################################################################
# RETRY CONFIGURATION #
######################################################################
# This single retry rule applies to all domains and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 2 hours and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 8 hours until 4 days have passed since the first
# failed delivery.
# Domain Error Retries
# ------ ----- -------
* * F,2h,15m; G,16h,2h,1.5; F,4d,8h
end
######################################################################
# REWRITE CONFIGURATION #
######################################################################
# There are no rewriting specifications in this default configuration file.
# This rewriting rule is particularly useful for dialup users who
# don't have their own domain, but could be useful for anyone.
# It looks up the real address of all local users in a file
*@dmprojects.com ${lookup{$1}lsearch{/etc/email-addresses}\
{$value}fail} frFs
end
######################################################################
# AUTHENTICATION CONFIGURATION #
######################################################################
# Look in the documentation (in package exim-doc or exim-doc-html for
# information on how to set up authenticated connections.
# The examples below are for server side authentication; they allow two
# styles of plain-text authentication against an /etc/exim/passwd file
# which should have user IDs in the first column and crypted passwords
# in the second.
# plain:
# driver = plaintext
# public_name = PLAIN
# server_condition = "${if crypteq{$2}{${extract{1}{:}{${lookup{$1}lsearch{/etc/exim/passwd}{$value}{*:*}}}}}{1}{0}}"
# server_set_id = $1
#
# login:
# driver = plaintext
# public_name = LOGIN
# server_prompts = "Username:: : Password::"
# server_condition = "${if crypteq{$2}{${extract{1}{:}{${lookup{$1}lsearch{/etc/exim/passwd}{$value}{*:*}}}}}{1}{0}}"
# server_set_id = $1
# These examples below are the equivalent for client side authentication.
# They assume that you only use client side authentication to connect to
# one host (such as a smarthost at your ISP), or else use the same user
# name and password everywhere
# plain:
# driver = plaintext
# public_name = PLAIN
# client_send = "^username^password"
#
# login:
# driver = plaintext
# public_name = LOGIN
# client_send = ": username : password"
#
# cram_md5:
# driver = cram_md5
# public_name = CRAM-MD5
# client_name = username
# client_secret = password
# End of Exim configuration file

Raw Paste

# This is the main exim configuration file. # It was originally generated by `eximconfig', part of the exim package # distributed with Debian, but it may edited by the mail system administrator. # This file originally generated by eximconfig at Sat Apr # See exim info section for details of the things that can be configured here. # Please see the manual for a complete list # of all the runtime configuration options that can be included in a # configuration file. # This file is divided into several parts, all but the last of which are # terminated by a line containing the word "end". The parts must appear # in the correct order, and all must be present (even if some of them are # in fact empty). Blank lines, and lines starting with # are ignored. ###################################################################### # MAIN CONFIGURATION SETTINGS # ###################################################################### # Specify the domain you want to be added to all unqualified addresses # here. Unqualified addresses are accepted only from local callers by # default. See the receiver_unqualified_{hosts,nets} options if you want # to permit unqualified addresses from remote sources. If this option is # not set, the primary_hostname value is used for qualification. qualify_domain = # If you want unqualified recipient addresses to be qualified with a different # domain to unqualified sender addresses, specify the recipient domain here. # If this option is not set, the qualify_domain value is used. # qualify_recipient = # Specify your local domains as a colon-separated list here. If this option # is not set (i.e. not mentioned in the configuration file), the # qualify_recipient value is used as the only local domain. If you do not want # to do any local deliveries, uncomment the following line, but do not supply # any data for it. This sets local_domains to an empty string, which is not # the same as not mentioning it at all. An empty string specifies that there # are no local domains; not setting it at all causes the default value (the # setting of qualify_recipient) to be used. local_domains = dmprojects.com:localhost:srv # Allow mail addressed to our hostname, or to our IP address. local_domains_include_host = true local_domains_include_host_literals = true # Domains we relay for; that is domains that aren't considered local but we # accept mail for them. #relay_domains = # If this is uncommented, we accept and relay mail for all domains we are # in the DNS as an MX for. #relay_domains_include_local_mx = true # No local deliveries will ever be run under the uids of these users (a colon- # separated list). An attempt to do so gets changed so that it runs under the # uid of "nobody" instead. This is a paranoic safety catch. Note the default # setting means you cannot deliver mail addressed to root as if it were a # normal user. This isn't usually a problem, as most sites have an alias for # root that redirects such mail to a human administrator. never_users = root # The setting below causes Exim to do a reverse DNS lookup on all incoming # IP calls, in order to get the true host name. If you feel this is too # expensive, you can specify the networks for which a lookup is done, or # remove the setting entirely. host_lookup = * # The setting below would, if uncommented, cause Exim to check the syntax of # all the headers that are supposed to contain email addresses (To:, From:, # etc). This reduces the level of bounced bounces considerably. # headers_check_syntax # Exim contains support for the Realtime Blocking List (RBL), and the many # similar services that are being maintained as part of the DNS. See # http://www.mail-abuse.org/ for background. The line below, if uncommented, # will reject mail from hosts in the RBL, and add warning headers to mail # from hosts in a list of dynamic-IP dialups. Note that MAPS may charge # for this service. #rbl_domains = rbl.mail-abuse.org/reject : dialups.mail-abuse.org/warn # http://www.rfc-ignorant.org is another interesting site with a number of # services you can use with the rbl_domains option # The setting below allows your host to be used as a mail relay by only # the hosts in the specified networks. See the section of the manual # entitled "Control of relaying" for more info. host_accept_relay = 127.0.0.1 : ::::1 : 192.168.0.0/24 # This setting allows anyone who has authenticated to use your host as a # mail relay. To use this you will need to set up some authenticators at # the end of the file host_auth_accept_relay = * # If you want Exim to support the "percent hack" for all your local domains, # uncomment the following line. This is the feature by which mail addressed # to x%y@z (where z is one of your local domains) is locally rerouted to # x@y and sent on. Otherwise x%y is treated as an ordinary local part # percent_hack_domains=* # If this option is set, then any process that is running as one of the # listed users may pass a message to Exim and specify the sender's # address using the "-f" command line option, without Exim's adding a # "Sender" header. trusted_users = mail # If this option is true, the SMTP command VRFY is supported on incoming # SMTP connections; otherwise it is not. smtp_verify = true # Some operating systems use the "gecos" field in the system password file # to hold other information in addition to users' real names. Exim looks up # this field when it is creating "sender" and "from" headers. If these options # are set, exim uses "gecos_pattern" to parse the gecos field, and then # expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched # by the pattern. gecos_pattern = ^([^,:]) gecos_name = $1 # This sets the maximum number of messages that will be accepted in one # connection and immediately delivered. If one connection sends more # messages than this, any further ones are accepted and queued but not # delivered. The default is 10, which is probably enough for most purposes, # but is too low on dialup SMTP systems, which often have many more mails # queued for them when they connect. smtp_accept_queue_per_connection = 100 # Send a mail to the postmaster when a message is frozen. There are many # reasons this could happen; one is if exim cannot deliver a mail with no # return address (normally a bounce) another that may be common on dialup # systems is if a DNS lookup of a smarthost fails. Read the documentation # for more details: you might like to look at the auto_thaw option freeze_tell_mailmaster = true # This string defines the contents of the \`Received' message header that # is added to each message, except for the timestamp, which is automatically # added on at the end, preceded by a semicolon. The string is expanded each # time it is used. received_header_text = "Received: \ ${if def:sender_rcvhost {from ${sender_rcvhost}\n\t}\ {${if def:sender_ident {from ${sender_ident} }}\ ${if def:sender_helo_name {(helo=${sender_helo_name})\n\t}}}}\ by ${primary_hostname} \ ${if def:received_protocol {with ${received_protocol}}} \ (Exim ${version_number} #${compile_number} (Debian))\n\t\ id ${message_id}\ ${if def:received_for {\n\tfor <$received_for>}}" # Attempt to verify recipient address before receiving mail, so that mails # to invalid addresses are rejected rather than accepted and then bounced. # Apparently some spammers are abusing servers that accept and then bounce # to send bounces containing their spam to people. receiver_try_verify = true # This would make exim advertise the 8BIT-MIME option. According to # RFC1652, this means it will take an 8bit message, and ensure it gets # delivered correctly. exim won't do this: it is entirely 8bit clean # but won't do any conversion if the next hop isn't. Therefore, if you # set this option you are asking exim to lie and not be RFC # compliant. But some people want it. #accept_8bitmime = true # This will cause it to accept mail only from the local interface #local_interfaces = 127.0.0.1 # If this next line is uncommented, any user can see the mail queue # by using the mailq command or exim -bp. #queue_list_requires_admin = false # end ###################################################################### # TRANSPORTS CONFIGURATION # ###################################################################### # ORDER DOES NOT MATTER # # Only one appropriate transport is called for each delivery. # ###################################################################### # This transport is used for local delivery to user mailboxes. On debian # systems group mail is used so we can write to the /var/spool/mail # directory. (The alternative, which most other unixes use, is to deliver # as the user's own group, into a sticky-bitted directory) local_delivery: driver = appendfile group = mail mode = 0660 mode_fail_narrower = false envelope_to_add = true return_path_add = true file = /var/spool/mail/${local_part} # This transport is used for handling pipe addresses generated by # alias or .forward files. If the pipe generates any standard output, # it is returned to the sender of the message as a delivery error. Set # return_fail_output instead if you want this to happen only when the # pipe fails to complete normally. address_pipe: driver = pipe path = /usr/bin:/bin:/usr/local/bin return_output # This transport is used for handling file addresses generated by alias # or .forward files. address_file: driver = appendfile envelope_to_add = true return_path_add = true # This transport is used for handling file addresses generated by alias # or .forward files if the path ends in "/", which causes it to be treated # as a directory name rather than a file name. Each message is then delivered # to a unique file in the directory. If instead you want all such deliveries to # be in the "maildir" format that is used by some other mail software, # uncomment the final option below. If this is done, the directory specified # in the .forward or alias file is the base maildir directory. # # Should you want to be able to specify either maildir or non-maildir # directory-style deliveries, then you must set up yet another transport, # called address_directory2. This is used if the path ends in "//" so should # be the one used for maildir, as the double slash suggests another level # of directory. In the absence of address_directory2, paths ending in // # are passed to address_directory. address_directory: driver = appendfile no_from_hack prefix = "" suffix = "" # maildir_format # This transport is used for handling autoreplies generated by the filtering # option of the forwardfile director. address_reply: driver = autoreply # This transport is used for procmail procmail_pipe: driver = pipe command = "/usr/bin/procmail" return_path_add delivery_date_add envelope_to_add # check_string = "From " # escape_string = ">From " suffix = "" # This transport is used for delivering messages over SMTP connections. remote_smtp: driver = smtp # authenticate_hosts = smarthost.isp.com # To use SMTP AUTH when sending to a particular host, such as your ISP's # smarthost, uncomment and edit the above line, and also the example # client-side authenticators at the bottom of the file end ###################################################################### # DIRECTORS CONFIGURATION # # Specifies how local addresses are handled # ###################################################################### # ORDER DOES MATTER # # A local address is passed to each in turn until it is accepted. # ###################################################################### # This allows local delivery to be forced, avoiding alias files and # forwarding. real_local: prefix = real- driver = localuser transport = local_delivery # This director handles aliasing using a traditional /etc/aliases file. # If any of your aliases expand to pipes or files, you will need to set # up a user and a group for these deliveries to run under. You can do # this by uncommenting the "user" option below (changing the user name # as appropriate) and adding a "group" option if necessary. system_aliases: driver = aliasfile file_transport = address_file pipe_transport = address_pipe file = /etc/aliases search_type = lsearch # user = list # Uncomment the above line if you are running smartlist # This director handles forwarding using traditional .forward files. # It also allows mail filtering when a forward file starts with the # string "# Exim filter": to disable filtering, uncomment the "filter" # option. The check_ancestor option means that if the forward file # generates an address that is an ancestor of the current one, the # current one gets passed on instead. This covers the case where A is # aliased to B and B has a .forward file pointing to A. # For standard debian setup of one group per user, it is acceptable---normal # even---for .forward to be group writable. If you have everyone in one # group, you should comment out the "modemask" line. Without it, the exim # default of 022 will apply, which is probably what you want. userforward: driver = forwardfile file_transport = address_file pipe_transport = address_pipe reply_transport = address_reply no_verify check_ancestor check_local_user file = .forward modemask = 002 filter # This director runs procmail for users who have a .procmailrc file procmail: driver = localuser transport = procmail_pipe require_files = ${local_part}:+${home}:+${home}/.procmailrc:+/usr/bin/procmail no_verify # This director matches local user mailboxes. localuser: driver = localuser transport = local_delivery end ###################################################################### # ROUTERS CONFIGURATION # # Specifies how remote addresses are handled # ###################################################################### # ORDER DOES MATTER # # A remote address is passed to each in turn until it is accepted. # ###################################################################### # Remote addresses are those with a domain that does not match any item # in the "local_domains" setting above. # This router routes to remote hosts over SMTP using a DNS lookup with # default options. lookuphost: driver = lookuphost transport = remote_smtp # This router routes to remote hosts over SMTP by explicit IP address, # given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs # require this facility, which is why it is enabled by default in Exim. # If you want to lock it out, set forbid_domain_literals in the main # configuration section above. literal: driver = ipliteral transport = remote_smtp end ###################################################################### # RETRY CONFIGURATION # ###################################################################### # This single retry rule applies to all domains and all errors. It specifies # retries every 15 minutes for 2 hours, then increasing retry intervals, # starting at 2 hours and increasing each time by a factor of 1.5, up to 16 # hours, then retries every 8 hours until 4 days have passed since the first # failed delivery. # Domain Error Retries # ------ ----- ------- * F,2h,15m; G,16h,2h,1.5; F,4d,8h end ###################################################################### # REWRITE CONFIGURATION # ###################################################################### # There are no rewriting specifications in this default configuration file. # This rewriting rule is particularly useful for dialup users who # don't have their own domain, but could be useful for anyone. # It looks up the real address of all local users in a file @dmprojects.com ${lookup{$1}lsearch{/etc/email-addresses}\ {$value}fail} frFs end ###################################################################### # AUTHENTICATION CONFIGURATION # ###################################################################### # Look in the documentation (in package exim-doc or exim-doc-html for # information on how to set up authenticated connections. # The examples below are for server side authentication; they allow two # styles of plain-text authentication against an /etc/exim/passwd file # which should have user IDs in the first column and crypted passwords # in the second. # plain: # driver = plaintext # public_name = PLAIN # server_condition = "${if crypteq{$2}{${extract{1}{:}{${lookup{$1}lsearch{/etc/exim/passwd}{$value}{:*}}}}}{1}{0}}" # server_set_id = $1 # # login: # driver = plaintext # public_name = LOGIN # server_prompts = "Username:: : Password::" # server_condition = "${if crypteq{$2}{${extract{1}{:}{${lookup{$1}lsearch{/etc/exim/passwd}{$value}{:}}}}}{1}{0}}" # server_set_id = $1 # These examples below are the equivalent for client side authentication. # They assume that you only use client side authentication to connect to # one host (such as a smarthost at your ISP), or else use the same user # name and password everywhere # plain: # driver = plaintext # public_name = PLAIN # client_send = "^username^password" # # login: # driver = plaintext # public_name = LOGIN # client_send = ": username : password" # # cram_md5: # driver = cram_md5 # public_name = CRAM-MD5 # client_name = username # client_secret = password # End of Exim configuration file

Login or Register to edit or fork this paste. It's free.