TEXT   26

serial.conf

Guest on 14th August 2022 01:01:58 AM

  1. #
  2. # This is a sample serial.conf file.  You should uncomment out and modify
  3. # the relevant lines as necessary.
  4. #
  5.  
  6. # These are the standard COM1 through COM4 devices
  7. #
  8. #/dev/ttyS0 uart 16450 port 0x3F8 irq 4
  9. #/dev/ttyS1 uart 16450 port 0x2F8 irq 3
  10. #/dev/ttyS2 uart 16450 port 0x3E8 irq 4
  11. #/dev/ttyS3 uart 16450 port 0x2E8 irq 3
  12.  
  13. # These are the first set of AST Fourport ports
  14. #
  15. #/dev/ttyS4 uart 16450 port 0x1A0 irq 9 fourport
  16. #/dev/ttyS5 uart 16450 port 0x1A8 irq 9 fourport
  17. #/dev/ttyS6 uart 16450 port 0x1B0 irq 9 fourport
  18. #/dev/ttyS7 uart 16450 port 0x1B8 irq 9 fourport
  19.  
  20. # This enables the new multiport masking feature, which is highly recommened
  21. # for AST FourPort boards.
  22. #
  23. #/dev/ttyS4 set_multiport port1 0x1BF mask1 0xf match1 0xf
  24.  
  25. # These are the second set of AST Fourport ports
  26. #
  27. #/dev/ttyS8 uart 16450 port 0x2A0 irq 5 fourport
  28. #/dev/ttyS9 uart 16450 port 0x2A8 irq 5 fourport
  29. #/dev/ttyS10 uart 16450 port 0x2B0 irq 5 fourport
  30. #/dev/ttyS11 uart 16450 port 0x2B8 irq 5 fourport
  31.  
  32. # This enables the new multiport masking feature, which is highly recommened
  33. # for AST FourPort boards.
  34. #
  35. #/dev/ttyS8 set_multiport port1 0x2BF mask1 0xf match1 0xf
  36.  
  37. # These are the 3rd and 4th ports on the Accent Async board.
  38. #
  39. #/dev/ttyS12 uart 16450 port 0x330 irq 4
  40. #/dev/ttyS13 uart 16450 port 0x338 irq 4
  41.  
  42. # These are two spare devices you can use to customize for
  43. # some board which is not supported above....
  44. #
  45. #/dev/ttyS14 uart XXXXX port XXXX irq X
  46. #/dev/ttyS15 uart XXXXX port XXXX irq X
  47.  
  48. # These are the ports used for either the Usenet Serial II
  49. # board, or the Boca Board 4, 8, or 16 port boards.
  50. #
  51. # Uncomment only the first 4 lines for the Usenet Serial II board,
  52. # and uncomment the first 4, 8, or all 16 lines for the
  53. # Boca Board BB-1004, BB-1008, and BB-2016 respectively.
  54. #
  55. #/dev/ttyS16 uart 16550A port 0x100 irq 12
  56. #/dev/ttyS17 uart 16550A port 0x108 irq 12
  57. #/dev/ttyS18 uart 16550A port 0x110 irq 12
  58. #/dev/ttyS19 uart 16550A port 0x118 irq 12
  59. #/dev/ttyS20 uart 16550A port 0x120 irq 12
  60. #/dev/ttyS21 uart 16550A port 0x128 irq 12
  61. #/dev/ttyS22 uart 16550A port 0x130 irq 12
  62. #/dev/ttyS23 uart 16550A port 0x138 irq 12
  63. #/dev/ttyS24 uart 16550A port 0x140 irq 12
  64. #/dev/ttyS25 uart 16550A port 0x148 irq 12
  65. #/dev/ttyS26 uart 16550A port 0x150 irq 12
  66. #/dev/ttyS27 uart 16550A port 0x158 irq 12
  67. #/dev/ttyS28 uart 16550A port 0x160 irq 12
  68. #/dev/ttyS29 uart 16550A port 0x168 irq 12
  69. #/dev/ttyS30 uart 16550A port 0x170 irq 12
  70. #/dev/ttyS31 uart 16550A port 0x178 irq 12
  71.  
  72. # This enables the new multiport masking feature, which is highly recommened
  73. # for Bocaboard ports.  Uncomment only the first line if you have a
  74. # BB-1004 or BB-1008.  Uncomment both lines if you have a BB-2016.
  75. # These numbers assume the Bocaboard is located at address 0x100.  If you
  76. # change this, remember to change the port1 and port2 addresses.
  77. #
  78. #/dev/ttyS16 set_multiport port1 0x107 mask1 0xff match1 0
  79. #/dev/ttyS16 set_multiport port2 0x147 mask2 0xff match2 0

Raw Paste


Login or Register to edit or fork this paste. It's free.