- #
- # This is an example for the global screenrc file.
- # You may want to install this file as /usr/local/etc/screenrc.
- # Check config.h for the exact location.
- #
- # Flaws of termcap and standard settings are done here.
- #
- startup_message on
- #defflow on # will force screen to process ^S/^Q
- deflogin on
- #autodetach off
- vbell on
- bell "bell in %n (%t)"
- vbell_msg " *beep* "
- activity "activity in %n (%t)"
- defscrollback 1000
- #vbell_msg " Wuff ---- Wuff!! "
- # all termcap entries are now duplicated as terminfo entries.
- # only difference should be the slightly modified syntax, and check for
- # terminfo entries, that are already corected in the database.
- #
- # G0 we have a SEMI-GRAPHICS-CHARACTER-MODE
- # WS this sequence resizes our window.
- # cs this sequence changes the scrollregion
- # hs@ we have no hardware statusline. screen will only believe that
- # there is a hardware status line if hs,ts,fs,ds are all set.
- # ts to statusline
- # fs from statusline
- # ds delete statusline
- # al add one line
- # AL add multiple lines
- # dl delete one line
- # DL delete multiple lines
- # ic insert one char (space)
- # IC insert multiple chars
- # nx terminal uses xon/xoff
- termcap facit|vt100|xterm LP:G0
- terminfo facit|vt100|xterm LP:G0
- #the vt100 description does not mention "dl". *sigh*
- termcap vt100 dl=5\E[M
- terminfo vt100 dl=5\E[M
- #facit's "al" / "dl" are buggy if the current / last line
- #contain attributes...
- termcap facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%d;%dr:ic@
- terminfo facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%p1%d;%p2%dr:ic@
- #make sun termcap/info better
- termcap sun 'up=^K:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:IC=\E[%d@:WS=1000\E[8;%d;%dt'
- terminfo sun 'up=^K:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC:IC=\E[%p1%d@:WS=\E[8;%p1%d;%p2%dt$<1000>'
- #xterm understands both im/ic and doesn't have a status line.
- #Note: Do not specify im and ic in the real termcap/info file as
- #some programs (e.g. vi) will (no,no, may (jw)) not work anymore.
- termcap xterm|fptwist hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
- terminfo xterm|fptwist hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
- # Long time I had this in my private screenrc file. But many people
- # seem to want it (jw):
- # we do not want the width to change to 80 characters on startup:
- # on suns, /etc/termcap has :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l:
- termcap xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
- terminfo xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
- #
- #
- termcapinfo xterm* OL=10000
- termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007'
- #
- # Do not use xterms alternate window buffer.
- # This one would not add lines to the scrollback buffer.
- #termcap xterm|xterms|xs ti=\E7\E[?47l
- #terminfo xterm|xterms|xs ti=\E7\E[?47l
- #make hp700 termcap/info better
- termcap hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
- terminfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
- #wyse-75-42 must have defflow control (xo = "terminal uses xon/xoff")
- #(nowadays: nx = padding doesn't work, have to use xon/off)
- #essential to have it here, as this is a slow terminal.
- termcap wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h
- terminfo wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h
- #remove some stupid / dangerous key bindings
- bind '^k'
- #bind 'L'
- bind '^\'
- #make them better
- bind '\\' quit
- bind 'K' kill
- bind 'I' login on
- bind 'O' login off
- bind '}' history
- #hack delete on redhat termcap issue
- bindkey -d -k kb stuff \010
- shell bash
- pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended."
- hardstatus alwayslastline " %d-%m-%y %c | %w"
- # scrollbar test
- #termcapinfo xterm ti@:te@
Raw Paste